Messages

11

Show"N"Tell ( Your Machines) / Re: Started my Taig enclosure......

« on: February 23, 2009, 03:57:38 PM »

Dave I am for sure buying it within the next few days and for sure will give a review

12

Show"N"Tell ( Your Machines) / Re: Started my Taig enclosure......

« on: February 23, 2009, 03:23:23 PM »

This one for $359.00 clams

13

Show"N"Tell ( Your Machines) / Re: Started my Taig enclosure......

« on: February 23, 2009, 12:36:51 PM »

I wish I would have seen that lowcostcnc unit a few days ago , unfortunaitly I already ordered a Jog dial on thursday but I am going to flip it on ebay for whatever I can get , what do you think of the lowcostcnc unit..............

14

Show"N"Tell ( Your Machines) / Re: Started my Taig enclosure......

« on: February 23, 2009, 10:59:51 AM »

David here is the jog dial below

http://www.stcloudrobotics.com/

But in the process of looking for it I ran into this cool unit that I think I will buy , way more functional

http://www.lowcostcncretrofits.com/jogremote.html

15

Show"N"Tell ( Your Machines) / Re: Started my Taig enclosure......

« on: February 23, 2009, 03:53:36 AM »

Very nicely done Dave , how do you like the shuttle pro . I have a Jogdial I just ordered , kind of the same

16

Show"N"Tell ( Your Machines) / Re: Taig CNC Lathe: First Run...

« on: February 14, 2009, 05:18:07 PM »

David here it is uploaded on youtube , sorry if the music is slow the only thing I could find thats 2:40 long , I see that I misspelled Gauge on the writeup in the begining credits...................................(Guage)

http://www.youtube.com/watch?v=pwclfAywPgA

Volt meter
http://cgi.ebay.com/4-1-2-Blue-LED-DC-200V-Digital-Volt-Voltage-Panel-Meter_W0QQitemZ350166419191QQihZ022QQcategoryZ25411QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

Regulated 5 volt power supply for meter
http://cgi.ebay.com/5V-7805-Power-supply-regulator-for-Digital-Volt-Meter_W0QQitemZ250370987017QQihZ015QQcategoryZ66995QQtcZphotoQQcmdZViewItem

17

Show"N"Tell ( Your Machines) / Re: Taig CNC Lathe: First Run...

« on: February 14, 2009, 01:40:46 AM »

Thats a really nice job Dave , hey stay tuned in I made a really cool digital RPM guage for the mill , I will post detailed info and pictures sometime tomorrow

18

Show"N"Tell ( Your Machines) / Re: Finished my Taig 4th Axis

« on: February 08, 2009, 11:59:03 AM »

Hello Dave

1....I just shut the room lights off for the benifit of the video , I have the standard 4ft fluorescents in the ceiling

2....Yes there is a threaded adaptor that came with the sherline , as far as runout I dont know if there is its got to be minimal .... something I have yet to check and I guess should

3... the lighting is 120 volt with the new screw in fluorescent screw in bulbs , the fixture is a standard bathroon lighting system . doesn't get hot and supplies execellent light . the bulbs take about a minute to reach full brightness

19

Show"N"Tell ( Your Machines) / Re: Finished my Taig 4th Axis

« on: February 08, 2009, 09:28:42 AM »

Dave a video for you , I ordered the bellows also thanks for the link

http://www.youtube.com/watch?v=qoW7rW_EsjY&feature=channel_page

20

Show"N"Tell ( Your Machines) / Re: Finished my Taig 4th Axis

« on: January 27, 2009, 01:16:09 AM »

Thank you very much Dave