Messages

1

PoKeys / Re: Need rommendations for PK55 based pendant

« on: May 22, 2011, 03:58:57 PM »

Dear zafar

I've tried  There was a problem.Apply all the buttons opto isolated TLP521  Use insulated cable 30 to50 meters no problem works

30 meter cable from my pcb. there is no problem 2mX4 meter plasma machine not noise  works beautifully

tekno

2

LazyCam (Beta) / L Cam Pro Plasma post-code correction

« on: April 04, 2011, 09:46:23 AM »

Hi
Dear Brian Barker

Plasma Post  inadequate or missing
for plasma post I wrote a macro (M29.M1s)
need to be added Plasma Default post
good performance with this macro

standart code

N5 (File Name = Graphic1 on Monday, April 04, 2011)
N10 (Default Plasma Post)
N15  G91.1
N20 G0  Z15.0000
N25 G0  X0.0000  Y0.0000
N30 G28.1 (Probe for Stock)
N35 G0  Z5.1000
N40 M3(PLasma On)
N45 G4 P2.5000
N50 G1  Z3.1000  F250.00
N55  Y39.4992  F800.00
N60  X41.5248
N65  Y0.0000
N70  X0.0000
N75 G4P0.20
N80 M5 (Plasma Off)
N180 G0 Z15.0000
N185 G0  X0.0000  Y0.0000
N190 M30




should be

N5 (File Name = Graphic1 on Monday, April 04, 2011)
N10 (Default Plasma Post)
N15  G91.1
N20 G0  Z15.0000
N25 G0  X0.0000  Y0.0000
N30 G28.1 (Probe for Stock)
N31 M29 (For Z height check)
N35 G0  Z5.1000
N40 M3(PLasma On)
N45 G4 P2.5000
N50 G1  Z3.1000  F250.00
N55  Y39.4992  F800.00
N60  X41.5248
N65  Y0.0000
N70  X0.0000
N75 G4P0.20
N80 M5 (Plasma Off)
N85 G0 Z15.0000
N90 G0  X0.0000  Y0.0000
N95 M30

3

PoKeys / Re: Pokeys pentant box

« on: February 27, 2011, 04:12:58 AM »

4

PoKeys / Re: PoKeys is working great! Thanks!

« on: February 25, 2011, 02:30:24 AM »

Hi  JHChoppers
Super Performance your system ,MPG motion

5

General Mach Discussion / Re: Plasma tube cutting

« on: January 02, 2011, 12:56:50 PM »

for tube cut machine video  link
http://www.youtube.com/watch?v=qUuHfi0QmTI

6

General Mach Discussion / Re: Plasma tube cutting

« on: January 02, 2011, 12:50:05 PM »

A Axis Not Required because, must be XY Plane work

Page Wizard option: must be For variable diameter

poppabear
Global Moderator

poppabear for you makes Page wizard

 For message poppabear link: http://www.machsupport.com/forum/index.php?action=profile;u=1633

7

General Mach Discussion / Re: Plasma tube cutting

« on: January 02, 2011, 12:19:02 PM »

Hi geast1967 
I did plasma tube cuting machine, I wrote the formula X axis to go 1 tour, because  tube diameter 300mm

for example :300 mm diameter X 3.14 :942 mm X plane You stepdriver 5000 micro step
write X axis  step per 5.370
for test MIDI page    X942 F200 X axis 1tour  rotary

8

General Mach Discussion / Re: Plasma tube cutting

« on: January 02, 2011, 05:44:33 AM »

Hi geast1967 greetings from istanbul  I wish you a happy new year
easy solution to your problem
you Rotate Axis  should be  X Axis 
300 X3.14 tube diameter: 942 mm
X-axis stepper resolution /942: X axis step per write
Also!!!
for continuous works  Must be PageWizard or macro

Tekno

9

General Mach Discussion / Re: Plasma Application, Mach3 torch height control.

« on: November 17, 2010, 04:53:04 PM »

Hi Guys
for cur read from plasma. must be 35/1 redictor or coverter noise filter pcb,because  140to350volt  verynoise cur out
If it is noclear ithe analog input voltage PIC is blocked . dc analog voltage 0 to 4.500mlv max (must be very clean)

if from Lpt1 the contact  runs very fast  up down or cur ok ,from modbus 100mls delay mode  contact  very slow process
makes the continuous problem

10

PoKeys / Re: Pokeys pentant box

« on: November 03, 2010, 07:24:26 AM »

Hi All  
For Self pentant. I did the test 4X20Lcd  was excellent  If you wish to USB Cable square holes

http://yfrog.com/51img0186ej
http://yfrog.com/6epb95bj