Topics

221

Tangent Corner / Thread views.

« on: April 15, 2018, 07:13:05 AM »

Just flicking through the forum pages today I spotted the number of views on my laser project thread at 666,666.
If we went back a few hundred years I wonder what Matthew Hopkins would have made of that number ?

Tweakie.

222

Members Docs / Using Modbus with Mach3.

« on: April 14, 2018, 07:25:25 AM »

A really excellent tutorial by Peter Homann.

Tweakie.

223

G-Code, CAD, and CAM discussions / MOVED: Z-axis keeps going up

« on: April 13, 2018, 02:04:33 AM »

This topic has been moved to General Mach Discussion.

http://www.machsupport.com/forum/index.php?topic=37019.0

224

G-Code, CAD, and CAM discussions / MOVED: Mach3 Turn post processor for Mastercam

« on: April 11, 2018, 06:06:17 AM »

This topic has been moved to Promote and discuss your product.

http://www.machsupport.com/forum/index.php?topic=34420.0

225

Screen Sets / Super Simple Screen Set

« on: April 05, 2018, 05:18:32 AM »

Here is an excellent Super Simple Screen Set created, for educational purposes, by Graham Waterworth.

The Mach3 Super Simple Screen Set: http://www.machsupport.com/forum/index.php?action=dlattach;topic=35288.0;attach=48518

The Mach4 Super Simple Screen Set:  http://www.machsupport.com/forum/index.php?action=dlattach;topic=35438.0;attach=46697

Tweakie.


Update:-

check out the new Lathe Screen sets :- https://www.machsupport.com/forum/index.php?topic=41385.msg271329#msg271329

226

Post Processors / Vectric post processor for Auggie laser operation.

« on: February 19, 2018, 06:43:30 AM »

This is my Vectric post processor for Auggie laser operation.

Tweakie.

227

Post Processors / Vectric post processor for Mach 4 laser operation.

« on: February 19, 2018, 06:41:18 AM »

This is my Vectric post processor for Mach 4 laser operation.

Tweakie.

EDIT:
Please note...
This pp is intended for vector operation only (using the M62/M63 command set) it does not support raster operation.

228

Post Processors / Vectric post processor for Mach3 laser operation.

« on: February 19, 2018, 06:39:58 AM »

This is my Vectric post processor for Mach 3 laser operation.

Tweakie.

229

Post Processors / LazyCam post processor for Mach3 laser operation.

« on: February 19, 2018, 05:55:53 AM »

This is my LazyCam post processor (incorporating the M11/M10 commands) for Mach3 laser operation.

(Please note that Mach3 version .057 or later is required for correct operation of the M11/M10 commands).

Tweakie.

230

Post Processors / DotG post processor for Mach3 Laser operation.

« on: February 19, 2018, 04:36:55 AM »

This is my DotG post processor for Mach3 laser operation.

Because the M11/M10 commands only operate upon axis movement and because DotG only produces it’s 'dot' output when the X and Y axis are stationary an imaginary B axis has been used to enable correct operation.
Within Mach3 the B axis is enabled and set-up with low step value - the Velocity / Acceleration can then be set to determine the ‘dot’ burn time.

Tweakie.