Messages

1

Mach SDK plugin questions and answers. / Re: Automating Mach from external software

« on: April 15, 2008, 02:21:03 PM »

thanks Andrew,

I'll see what i can do.

i've never used the SDK untill now so i have a couple of questions befor starting.

* When we use VB.NET and Mach SDK, does it mean we can run MACH3 without acually running MACH3 standard application?
* When I run the test C#, on the screen ther is the load button, when i load the MACH from the test screen the standard Mach is running on the backround and displayed within the screen, I don't understand why to run a screen like test C# when you have the same screen running on the backround.

i hope you understand my point   

2

Mach SDK plugin questions and answers. / Re: Automating Mach from external software

« on: March 29, 2008, 06:54:38 PM »

hi,
can we do this in VB.NET ?

regards
carlo

3

Brains Development / view Gcode filename with brain

« on: January 09, 2008, 08:41:52 AM »

Hi,
I have tried to load a Gcode file into the Mach with BRAIN and PLC input it was successful.
My question is: is there any chance to view the Gcode filename on the PLC(modbus) or  touchscreen(modbus).

Thank you
Carlo

4

General Mach Discussion / Re: Z axis Jogging when MACH is running :)

« on: December 08, 2007, 03:40:16 PM »

Hi guys,
Thank you for your reply, I got it. 

5

General Mach Discussion / Z axis Jogging when MACH is running :)

« on: December 05, 2007, 02:32:14 PM »

Hi guys,
How can I Jog the Z axis movement when the MACH3 is running?
Example: I will install an inductive sensor in front of the Z axis (laser), When MACH3 is running and when the sensor reads a signal ON the Z axis should move upwards until the sensor signal is OFF(0) otherwise MACH3  should continue running.
Any help will be appreciated
Thank you
carlo

6

Modbus / Re: MODIO

« on: November 13, 2007, 01:45:20 AM »

hi, sorry for the delay
here is a sample of LGs MK120 PLC connected to Mach MODBUS Plugin and brain.

if you need further information I'll be happy to send.

7

Modbus / MODIO

« on: November 07, 2007, 12:54:59 PM »

I have connected the LG PLC to the MODIO plugin of MACH3 with brain,  ::)all IOs and analog values , its great.
I can send the sample if someone is interested.
Thank you Brains, thank you ART

carlo