Messages

1

General Mach Discussion / USB and LAN controll board .. problem

« on: November 01, 2022, 12:45:43 PM »

Hi.
I have BSMCEO4U and BSMCI14E .
BSMCEO4U  is on USB , I use USB isolator , but still noise (for example from my desctop lamp) reset communication - big trouble ..
BSMCI14E is on LAN , use UDP communication , port 1234 , 1235 , if click with mouse to Rest button then randomly switch On or Off
Output's .

What controller you use and you don't have this problem?

regards.

2

General Mach Discussion / Software Reset button .. randomly switch On/Off output..

« on: November 01, 2022, 05:07:44 AM »

Hi all.

(Windows 10 64bit , latest version Mach3 , BSCMI14E controller LAN .)

I start test my CNC with BSCMI14E LAN controller, find very big problem .. if click with mouse to Reset button then some time
randomly set On or Off output relay (Output 1 to Output 4 ) .

You have this same issue?

3

General Mach Discussion / Re: Bitsensor LAN controller plug-in

« on: October 29, 2022, 04:42:35 AM »

I find it on Internet ..working..

4

General Mach Discussion / Bitsensor LAN controller plug-in

« on: October 29, 2022, 04:31:14 AM »

Hi all.
I ordered Bitsensor BSMCI14E LAN controll board , but don't have plug-in , in package was board and cable only.
USB version not working good (reseting communication) , then ordered LAN version .
Seller still not send plugin , then I try here if have some one this controll board .. and can send me plug-in .
Best regards.

5

General Mach Discussion / Re: Mach3: Formula Axis Correction

« on: October 10, 2022, 03:56:09 PM »

OK.
Understand ..

6

General Mach Discussion / Re: Mach3: Formula Axis Correction

« on: October 10, 2022, 03:44:17 PM »

Hi Craig.
Yes, but it is possible to do it internally in Mach3 or Mach4?
I have many python script for gcode transformation, and there exist many utilities for G2/G3 to G1 convert..
For example, make a new plugin to do it..

7

General Mach Discussion / Re: Mach3: Formula Axis Correction

« on: October 10, 2022, 02:47:24 PM »

Hi again ..
Is there any gcode trasformation before execute it ?
using VBasic script editor or different way .. .
I see so there is possible edit button , make script for M code .
Is possible read gcode (loaded gcode from file) line by line and
make transformation. Or is possible manage path planner?

My idea is to read line by line , and recalculate it , transform , and get back , or generate more shorter gcode's and send to path planner.
I don't know how it working .. but just ide .. .

regards.

 

8

General Mach Discussion / Re: Mach3: Formula Axis Correction

« on: October 03, 2022, 11:30:33 AM »

Thanks for your post , understand.

9

General Mach Discussion / Mach3: Formula Axis Correction

« on: October 02, 2022, 11:12:58 AM »

Hi all.
I'm new on this forum , then sorry if give same question .. but..

I have 3 axis CNC machine (self made) and have some mechanical error , and want solve this problem with
software: Formula Axis Correction
I genetare formula for Z axis : Z = Z+(2*10^-6*X^2-0,0007*X+0,0016) , and if test it with button Test , then on result give me value what I expected.
But If try it in real movement then move still same . This formula make small correction +-0.05mm.
But not working :

Mach 3 version : R2.63
CNC controll board : USB BSMCE04U

Is possible do it with this control board ?
I enable : Formulas Enabled

regards.