Messages

1

General Mach Discussion / Re: Homing Machine moves over .500"

« on: January 12, 2022, 12:34:14 PM »

It just seems like it’s in MM cause it’ll go up to the home switch but switching to inch it drops .500 inches.

2

General Mach Discussion / Re: Homing Machine moves over .500"

« on: January 12, 2022, 12:28:25 PM »

This is the controller I have.

https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach3-USB-Board

3

General Mach Discussion / Re: Homing Machine moves over .500"

« on: January 12, 2022, 12:11:31 PM »

I have the 6040 cnc router. It has a red usb board in it.

4

General Mach Discussion / Re: Homing Machine moves over .500"

« on: January 12, 2022, 11:27:50 AM »

Is there a way to edit the homing script?

5

General Mach Discussion / Re: Homing Machine moves over .500"

« on: January 12, 2022, 07:42:25 AM »

The part that throws me off is when I start up the machine when it’s in metric it’ll home without that .500 of an inch, if I switch machine to inch with a G20 it’ll do that .500 drop down. I converted my machine to inch and it still does it. It seems to me like somewhere it’s got .5mm saved and it needs to be less than than that for inches.

I’m using the usb controller.

6

General Mach Discussion / Homing Machine moves over .500"

« on: January 11, 2022, 11:17:18 PM »

I recently added home switches to my machine. Everything seems to work fine but, when I home it after it does it homing process it moves over off the switch .500". It does the same for all the axis. I'd like it to stay closer to the switch. Where in the software can I edit that. Any help in fixing this would be greatly appreciated.