1
Mach4 General Discussion / Re: Mach4 and Autoleveller issues ( CSMIO IP-M)
« on: August 12, 2021, 07:42:09 AM »
Just to add result from generated file and error ( total 6 pount to measure ):
X2.6810 Y4.4490 Z0.1834 (initial measure)
X146.9640 Y4.4490 Z-2.0986 (second point but Z axis is from first point)
X291.2470 Y4.4490 Z-1.7330 (third point but Z axis is from second pount)
X291.2470 Y187.8600 Z-1.0205
X146.9640 Y187.8600 Z-3.6611
X2.6810 Y187.8600 Z-4.3580
6 point measure missing completely
Screenshot of error message is in attachment.
X2.6810 Y4.4490 Z0.1834 (initial measure)
X146.9640 Y4.4490 Z-2.0986 (second point but Z axis is from first point)
X291.2470 Y4.4490 Z-1.7330 (third point but Z axis is from second pount)
X291.2470 Y187.8600 Z-1.0205
X146.9640 Y187.8600 Z-3.6611
X2.6810 Y187.8600 Z-4.3580
6 point measure missing completely
Screenshot of error message is in attachment.