Messages

1

Mach4 General Discussion / Re: [ESS] Z axis issues

« on: November 18, 2020, 02:32:14 PM »

To fix the G04 Pxx stalling problem, get Warp9's ESS266 plugin and use V18 screen.set.   I test 100 probe cycles and Never stopped or stalled.
See forum and search for G04 P0.10 Stall.    See https://warp9td.com/index.php/kunena/plugin-releases/8648-ess-build-266#26050

2

Mach4 General Discussion / Re: [ESS] Z axis issues

« on: November 16, 2020, 06:14:37 PM »

I too, have this same issue with the G04 P0.********* stalling intermittently.   This stall only occurs after the m2020(HC_WORK_Z_ZEROED=1) and it stalls about 50% of the time (may work one time and then stall the next time).  I am not sure if this is a Mach4 or a ESS problem.  This same issue has been reported to Warp9 and they have come up with a Temp work around.  See Warp9td.com forum and search for "G04 P0.10 stall."   The 'look ahead' value also seams to be involved with this problem, also.
I hope that Mach4/Warp9 guys can get to root cause and come up with a solution soon.