Messages

1

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 10, 2020, 08:52:27 AM »

Hi there Today the cslab people answered me again. They have told me that they will test next week on their machine that they have tests. From there they will inform us. We are in touch. Gretting

2

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 09, 2020, 03:56:12 AM »

Hi Craig.
Seeing the same problem that we all have, it is certainly a cslab problem.
So I have started a conversation with them to see if they want to fix it or give us a solution.
With the clients that we are having that problem, I imagine, they are interested in fixing it.
I will continue to inform you of everything they tell me. Let's see if we all succeed ...

3

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 08, 2020, 01:51:40 PM »

It works for me. One thing the encoder gives you the actual rpm?

4

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 08, 2020, 12:45:48 PM »

Today they answered that if we have updated the firmware, the latest version is 3,204.
If we have that one, they would keep telling us ...
Let's see the next email that they tell us ...
We are in touch.

5

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 07, 2020, 03:03:23 PM »

Hello Prendice Quirino Jr.
If you answered me today, I told you about the problem we have, I have told you that there are several people with this problem.
What they have told me in the first place is that if we have updated the latest version of the firmware, that in this latest version is supposed to have corrected the error. I updated it 2 weeks ago and it doesn't work for me. The last update was released on February 10, so ... they will keep informing me on the other hand, to see if we can get it.
Do you have the firmware and mach 4 updated right now? I still need to update mach 4. It is for talking to them to see if they give us a solution.
We are in contact and with what they tell me I will tell you.
Regard.

6

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 06, 2020, 10:16:14 AM »

Hello Prendice Quirino Jr.
In my case, the reference pulse is visible to the naked eye, but as you say, it passes very quickly. Maybe he doesn't have time to read that signal.
We also tried to reverse the signal to negative and nothing.
I have tried almost everything, they told us it was a firmware problem but at the moment there are no results.
But we see that with csmio ip S if it is possible because Daniba if it is threading.
I have also tried with the index, only 1 pulse and I could not.
Mach technical support does not provide solutions.
I have been told that they do not develop cslab handling. I will write to them to see what they tell me ...
We are in contact here to see if with the tests you do and with what they answer, we can solve the problem.
Greetings Thank you

7

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 04, 2020, 04:40:40 AM »

Hi Daniba.
I still haven't been able to. Right now I have work and I couldn't stop updating. As soon as I can I inform you.
I have written again to the technical service. Let's see what they tell me.

8

CS-Lab / problem threading whit mach 4 csmio ip A+csmio enc

« on: April 04, 2020, 02:58:52 AM »

Hi everyone.
I did a retrofit of a cnc lathe.
I have the csmio ip A + csmio Enc.
Can anyone thread?
Let's see if you can lend me a hand. Thank you

9

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 02, 2020, 04:52:59 PM »

Well, we asked cslab and they told us that with the csmio enc if it could be threaded. But we are seeing that no. We wrote back to them and they said it was a firmware problem that they would fix it. We have been for 2 years and it remains the same. The tool is positioned and does not advance. The only thing we have left is the update.

10

CS-Lab / Re: CSMIO/IP-A Mach4 lathe retrofit

« on: April 02, 2020, 04:20:27 PM »

Hi, as soon as I can, I'll update it to see if it's out there.
Do not buy the encoder because as I already mentioned we have made a retrofit of the lathe. The machine was working, the problem went away and we put this in control.
So we are using the encoder that I already had.
My lathe is a large one, a bench of 2m and a plate of 400mm.
As it is not the update, or that it derives from somewhere, I do not know where to throw it, it took more than 2 years to see if we managed to make the threading work, we asked the cslab and it told us that they would correct the firmware error.
But at the moment nothing, the machine works perfectly less the threading.
From what I see people do thread with mach4.
Thanks for everything, I will update what I said and I'll tell you to see if it works. Thank you