Messages

1

Mach4 General Discussion / Re: Motion Problem

« on: November 27, 2022, 01:55:04 PM »

Changed feed mode from Per Rev to Per min. Now everything works as expected.

2

Mach4 General Discussion / Re: Motion Problem

« on: November 26, 2022, 06:19:23 PM »

Never mind got it!

3

Mach4 General Discussion / Motion Problem

« on: November 26, 2022, 03:42:07 PM »

Building a New Router running Mach4 ESS and C25XP testing motion it jogs every direction perfect,Homes Perfect will run gcode as long as i am using G0 if i use G1 G2 G31 G83 nothing on motion no error. Not sure where to look Mach4?? ESS?? C25XP??. I am testing with Gcode that my mill runs fine Mach4 ESS MB3. Any advice is welcome. Started with 4818  ESS 275 i think, tried up grading to 5000 Ess 284 No Change.

4

Mach4 General Discussion / Re: Retract

« on: January 06, 2022, 10:31:03 AM »

Hi
The function is found it the TOGGLE Button not where i was looking under the Standard Button.Drop a Toggle button on your screenset goto input and select Retract. Leds also have Retract.I had to take a screen shot of the subroutine from the mach4 Video and write it out because Mach does not yet come with it.I will attach it to the post, put it in the Mach4 Subroutines folder.I also set the button to be enabled with file running it does not play well with feed Hold.

5

Mach4 General Discussion / Re: Retract

« on: December 10, 2021, 02:04:56 AM »

Finally figured it out.

6

Mach4 General Discussion / Re: Retract

« on: December 09, 2021, 11:50:48 AM »

Ok I see RetractCode and RetractExitCode in the register under core/inst but have no idea how to access it any help would be great .

7

Mach4 General Discussion / Re: Retract

« on: December 02, 2021, 08:20:49 PM »

Hi thanks for the reply i have downloaded that version and i also tried the version that was used in the YT vid.
I do not see the RETRACT function or the .tap file in the subroutine folder. what am i missing. I have looked at all
the predefined button functions in the screen editor.

Thanks Dan

8

Mach4 General Discussion / Retract

« on: November 28, 2021, 11:41:28 AM »

Is the retract function out yet and is it for the Hobby or just the Industrial.
Thanks Dan

9

Mach4 Toolbox / wxGridCellRenderer

« on: August 09, 2020, 08:20:37 PM »

Has Anyone written a new wxGridCellRenderer I would like to put bitmaps in wxgrid cells. I dont seem to be able to wrap my head around how to write it any push in the right direction would be great.

DanP

10

Mach4 General Discussion / Re: msvcp140.dll missing

« on: December 29, 2019, 12:10:57 PM »

Not sure but maybe this will help.
https://www.youtube.com/watch?v=5A9cuz0b7Ho

Dan