Messages

1

General Mach Discussion / Re: Problems when switching from mill to plasma profile

« on: January 24, 2019, 02:18:27 PM »

Thanks, TPS
I had made a copy of my Mill profile, and it worked fine, but I was unaware that I could view it as a plasma screenview. I'm assuming in that view I will have access to the plasma settings ,ie, THC and such. Thanks again. I will try it again.

2

General Mach Discussion / Problems when switching from mill to plasma profile

« on: January 24, 2019, 11:57:56 AM »

Hey All. I am new to the forum and mach3. I have been running my homemade cnc router using the Mill profile and all has been working very well. I recently tried switching to the plasma profile and used all the same configuration to get started. motor tuning, ports and pins, etc. was all set up the same. The problem is that when I try to jog the X axis, the Z moves, as does the x when I try to jog the Y. I have double checked all the config and can't find anything different from the Mill settings, which all work great. Any Ideas? thanks.

3

Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!

« on: January 24, 2019, 11:40:52 AM »

Hey y'all. New to the forum and finally posting. I built from scratch a cnc router using Open Builds rail and steppers. Using Mach3 with the mill profile as of now. Also wanting to use the machine as a plasma cutter, but still trying to learn that side of it. I will be posting several questions I'm sure, so please be patient:)
Don

4

General Mach Discussion / Re: This Froum Search Error .... Help please

« on: November 11, 2018, 04:15:02 PM »

ME too. Just joined and my first thing to do was try the search. Got the same message.