Messages

1

Mach4 General Discussion / Re: adding a simple relay

« on: February 24, 2023, 09:15:25 PM »

Craig
good thing I got this working I really needed Beer..
I got it working under pin 14, P2-pin14. when I had it on pin17 it would not work. I would set it to active low and the relay would come on but button
would not switch. I have C25 BOB otherwise same as you. pin 17 must be smoked.. i like the physical button idea. So if i connect a external button to an input and select that input in the screen button properties it will do the same as the onscreen button?? I can do that. as far as the scripting for the on screen button what would be an example of that? by the way thanks' for the help much appreciated.. this is a good thread I'm sure it will help a lot of people..

Cheers
Frank

2

Mach4 General Discussion / Re: adding a simple relay

« on: February 24, 2023, 09:39:50 AM »

Hi Craig
thanks for the reply firstly the beer keg sounds like a good idea!! M8 is already in use
and i would like to use a button on the mark4 screen set i have done the research on adding the button
but I seem to be stuck on making the relay turn on and off i can get the output to light up but it stays on
is this something you can help me with
thx in advance

Frank

3

Mach4 General Discussion / adding a simple relay

« on: February 01, 2023, 10:28:41 PM »

Hello I would like to add a simole relay to Mach4 and ESS to control dust collection
any help would be Appreciated

4

Mach4 General Discussion / Re: Keyboard Inputs enabled right after Mach4 starts

« on: September 06, 2022, 09:23:32 PM »

dobrzann
i just added the last line and worked great for me thanks

KeyboardInputsToggle() --This make KeyboardInputsToggle enable

5

Mach4 General Discussion / Re: pulse train not smooth

« on: January 05, 2018, 01:08:04 PM »

so can I get my licence for Darwin refunded??

6

Mach4 General Discussion / pulse train not smooth

« on: January 04, 2018, 03:46:17 PM »

I have just started a build and mach4 with Darwin. the pulse train is not smooth. also their is nose in the Darwin test
Art can you take a look and help. I have just spent $225 on mach4 and Darwin because I have had mach 3 for years with out a problem
Frank
How do I attach my Mach4 profile?

7

G-Code, CAD, and CAM discussions / masrercam

« on: August 07, 2007, 10:06:35 PM »

im useing mastercam x and mach3 postprocessor when i run the gcode on mach, i get a long lead in
can anybody help

8

G-Code, CAD, and CAM discussions / Re: DFX to G Code

« on: August 06, 2007, 09:12:36 PM »

Hi I have access to master cam any tutorials on how to do this I can use the computer with master cam if I take the files I make with me

9

G-Code, CAD, and CAM discussions / Re: Import DXF into MACH3

« on: July 29, 2007, 10:11:39 PM »

were do i find these express tools