Messages

1

General Mach Discussion / Re: how to configure mach3 closed loop spindle control

« on: November 29, 2017, 05:26:45 PM »

hi

ok "closed loop spindle control" is for only lathe?
br

2

General Mach Discussion / how to configure mach3 closed loop spindle control

« on: November 26, 2017, 06:04:45 PM »

hi
i have mach3 with akz250 control card, i need to configure  closed loop  pwm vfd spindle.
on mach3 i set:
 "use spindle feedback in sync mode" on
 "closed loop spindle control" on
but the closed loop not work, when the spindle forces the rpm go down.

3

General Mach Discussion / Re: mach3 use ACK250 and MPG on LPT2

« on: October 08, 2017, 04:24:35 AM »

hi

I do not understand "enuf input"?

what is "enuf"?

regards.

4

General Mach Discussion / Re: mach3 use ACK250 and MPG on LPT2

« on: October 07, 2017, 07:03:03 PM »

hi

sorry for my error, not ACK250, AKZ250, leafboy77 motion card.

i would like to connect  standard MPG not USB MPG, but i need alot of input.

AKZ250 have 16 input, i need:
 3 input  for select 1-10-100,
 4 input for X,Y,Z,A
 2 input for Encoder A e B

total 9 input, half board input.

5

General Mach Discussion / mach3 use ACK250 and MPG on LPT2

« on: October 07, 2017, 11:10:11 AM »

hi

i use mach3 for my cnc mill, i use ACK250 usb card.
is possible configure LPT2 for MPG pendant?

thanks at all.