7
« on: September 23, 2017, 02:33:43 AM »
Hello Craig
The computer running the mill has no internet connection. We were told not to.
Have taken photos on my Ipad of the first four of the con/fig ports and pin, taken photos of the test with the start long signals and other through the test.
Taken the sides off the mill and taken photos of all the inside, quite a few LEDS working, pressed the keys on the key board and the lights never changed /blinked.
Turned off mill and the reset button started to flash and would not stop, asking for external reset. turned mill back on and the restart on the computer would turn off.
Sorry Craig, pretty old (71) and have trouble understanding some of the things.
Cheers John