Ive tried every cnc forum that I know and still cant get any feedback. Figured ide try here.
I first want to say that I have near 0 understanding of electronics and cnc systems. I have some minor background knowledge of cnc but not enough to do my own retrofit.
Ive got a 1977 Mori Seiki SL-BB (its essentially an SL-1) that im trying to retro a pc based control to. I bought the machine stupid cheap and the day I got it fully installed, it blew out the control
Ive already removed the old control. Everything is gone except for the servos and encoders. The original spindle motor and drive have been removed. I got an AC Dayton 5hp motor to use for the spindle. Will buy a VFD to run it. I would like someone to tell me what I should use for retrofit hardware. I want to keep the closed look system and use my original encoders (including the spindle encoder). I would like to use an Ethernet motion controller (I hear they are faster and better suited for high precision/industrial environments)
what hardware I currently have:
-both axes are Yaskawa UGCMEM-04DB1SF DC servos. 70v .4-2.6kW. Tacho-generator with pulse encoders.
-servo encoders 500 pulse per rev. A, B & Z channels.
-spindle encoder PC-1024Z-WFT, 1024 pulse per rev. A and B phases. 1 pulse/rev= A phase.
I will attach pics of data plates and the machine itself