1
General Mach Discussion / Re: Budget CNC build questions
« on: March 05, 2016, 05:49:08 PM »
Well, I did some more testing on the board, and think it's the culprit. Returning and trying another.
I did not try another parallel as only have the one. It's a straight thru extension. The board is powered by USB 5v, the power supply powers the 12v end of the board, so both are always hooked up to make things work.
Here's the XML just in case, but I think it's a hardware issue.
And the documentation (or lack there-of as is the case).
I did not try another parallel as only have the one. It's a straight thru extension. The board is powered by USB 5v, the power supply powers the 12v end of the board, so both are always hooked up to make things work.
Here's the XML just in case, but I think it's a hardware issue.
And the documentation (or lack there-of as is the case).