Messages

1

General Mach Discussion / Re: My CNC 2030 stops following G codes

« on: May 11, 2016, 06:31:05 AM »

Thank you very much for your comprehensive answer.
Can you please recommend me high quality stepper motor I can buy?

Best regards.

2

General Mach Discussion / Re: My CNC 2030 stops following G codes

« on: May 09, 2016, 12:56:51 PM »

Hi.
One more question.
After 4 hours work the motors of my CNC machine get very hot.
Shal I stop to cool them? How hot do they have to get?
Thanks.

Best regards.

3

General Mach Discussion / Re: My CNC 2030 stops following G codes

« on: March 24, 2016, 10:12:19 AM »

Thanks.
The reason is Loose coupling on the Z axis motor.
Now I tight bolts every 10 min. of work.
Is there any way so I don't have to tight the bolts that often?

Best regards.

4

General Mach Discussion / Re: My CNC 2030 stops following G codes

« on: March 19, 2016, 07:12:57 AM »

So can you help me solve this problem, or maybe you know somebody who can?
Thanks

Best regards.

5

General Mach Discussion / My CNC 2030 stops following G codes

« on: March 14, 2016, 10:38:28 AM »

Hi
I have CNC 2030 and use it with Mach3 software.
I use Artcam express to design projects.
Sometimes when I load G codes, the machine starts engraving and after a couple of minutes start drilling deep hole and breaks the bit.
Can you help me solve the problem please?
Thanks.

Best regards.

6

General Mach Discussion / Re: Mirrored model

« on: March 12, 2016, 09:38:38 PM »

Thanks a lot. Problem solved 
One more question ..
When I load G codes and program start engraving, sometimes starts drill deep hole which is not programmed and breacks the bit.
Can you help me with that too?

Best regards.

7

General Mach Discussion / Re: Mirrored model

« on: March 12, 2016, 10:00:21 AM »

Thank you.
Need to check X and Y only, or Z too?

8

General Mach Discussion / Mirrored model

« on: March 12, 2016, 08:13:30 AM »

Hi.
I have a small issue with my cnc 2030 which I bought lately, and Mach3
I design with Artcam express program, and when I load g-codes, the machine starts engraving mirrored the model I've designed.
If anybody knows how to fix it, please help.

Best regards.

9

General Mach Discussion / Re: Deformed shapes

« on: February 10, 2016, 06:51:59 PM »

Thanks guys for the useful info.
Best regards.

10

General Mach Discussion / Re: Deformed shapes

« on: February 10, 2016, 10:11:21 AM »