Messages

1

G-Code, CAD, and CAM discussions / Re: Z-axis going down, but not programmed

« on: August 19, 2007, 06:09:29 PM »

Hello,

I have removed the G0 code, but the problem is the same.

I have no idea.   

Thanks for the help.

mvg

Hein

2

G-Code, CAD, and CAM discussions / Re: Z-axis going down, but not programmed

« on: August 18, 2007, 12:38:42 PM »

Hello,

The problem above, is the problem with my machine.
The z-axe is going down faster and faster in the matertial, until, ...

Sometimes its works perfect, and sometimes its going wrong.
I have no idea whats happend.

This is my code:

Code: [Select]

G21
G0 G17 G40 G49 G80 G90
G61(CONSTANT CONTOUR OFF OR TURN ON W/G64)
M07(Cooling ON)
(2 1/2 Axis Pocketing)
G55
S1000 M03
G00 Z1.5000
X0.0000 Y-2.2500
G01 Z-0.6000 F30.0
Y0.0000 F50.0
X130.0000
Y-3.0000
X0.0000
Y-2.2500
X0.7500
Y-0.7500
X129.2500
Y-2.2500
X0.7500
G00 Z1.5000
X0.0000
G01 Z-1.2000 F30.0
Y0.0000 F50.0
X130.0000
Y-3.0000
X0.0000
Y-2.2500
X0.7500
Y-0.7500
X129.2500
Y-2.2500
X0.7500
G00 Z1.5000
M05
M30

I hope that someone can help my, it's verry urgent.

Thanks a lot.

Hein