Messages

1

General Mach Discussion / milliard

« on: September 10, 2022, 05:57:35 PM »

is millwizard compatible with windows 11 i cant get it to take the license fill on the help about screen

2

General Mach Discussion / Re: Pulse Frequency drops and motors don't work properly

« on: February 16, 2018, 06:43:05 AM »

i have the same problem was working good for 12 months now starting to play up must be sum thing in the PC that controls the pulse

3

General Mach Discussion / Re: steppers nocking

« on: June 28, 2017, 08:20:45 AM »

the old computer was working good its very old  need a back up CP for when it stops working so i know the mill set up is good on my mill must be the PC i have reinstaled XP  will try it tomorow im useing paralle port i used the XML file from old PC

4

General Mach Discussion / steppers nocking

« on: June 27, 2017, 05:20:50 PM »

i have a new computor made of new parts (old stock ) i have it working but it has a nocking noise in the steppers it runs windows XP can anyone sergest any thing i can try to fix it

5

General Mach Discussion / Re: installing millwizard

« on: June 24, 2017, 09:15:42 PM »

if any one knows what wrong let me know

6

General Mach Discussion / Re: installing millwizard

« on: June 24, 2017, 09:14:52 PM »

this is my file
[JobSetup]
Material=Steel
CustomCode=
Strategy=Equal
MatNum=2
Units=0
Rapid=1.0000
Clear=0.0500
FileName=
ToolTableName=C:\\Documents and Settings\\Ron\\Application Data\\NFS_Mill\\ToolTable\\DefaultINCH.wtl

[KeywaySlot]
Xorign=0.0000
Yorign=0.0000
Length=2.0000
Angle=0.0000
SlotWidth=0.5000
Finish=0.0000
Rapid=0.1000
Ztop=0.0000
Zdepth=-0.1000
Zstep=0.0500

[CutRectangle]
Xorign=0
Yorign=0
Length=5
Width=4
CorR=.5
Direction=0
Orign=2
InOut=0
Rapid=.1
Ztop=0
Zdepth=-.1
Zstep=.05

[HoleRect]
Xstart=0
Ystart=0
Length=5
Width=3
NumLength=4
NumWidth=3
Pattern=1
Orign=0
Trav=.1
Depth=-.5
Peck=.1
RapidHt=.1
Type=1

[Engrave]
Xstart=0.0000
Ystart=-10.0000
Height=1.0000
Text=Wizard
Rapid=0.1000
Zdepth=-0.0300
Ztop=0.0000
FontFile=C:\\Documents and Settings\\Ron\\My Documents\\Csrc\\Wizard\\DialogBlocks Projects\\Fonts\\SCRIPTS.CHR
RotAngle=45.0000

[Surface]
Length=2.0000
Orign=3
Width=2.0000
Xorign=0.0000
Yorign=0.0000
Ztop=0.0000
Zdepth=-0.1000
Zstep=0.2000
StepOver=63.0000
Rapid=0.2000
RotAngle=25.0000

[Tool]
ToolNum=4
ToolDia=0.2500
Flutes=3
Type=0
SFM=95.0000
ChipLoad=0.0008
Speed=1451.0000
Feed=3.4800
Plunge=1.7400
Flood=0
Mist=0
Xorign=5
RampAngle=5.0000
Description=1/4 MILL
UserDia=0.2500
ToolUnits=0

[CircPocket]
Xorign=0.0000
Yorign=2.0000
Dia=0.2750
Direction=0
Ztop=-0.5000
Zdepth=-0.6000
Zstep=0.1000
StepOver=43.0000
Rapid=0.1000

[HoleCircle]
Xcen=5.0000
Ycen=0.0000
Num=5
Dia=5.0000
StAng=36.0000
Ztop=0.0000
Depth=-2.0000
Peck=0.2000
RapidHt=0.2500
Type=0
Trav=0.0000
HoleDia=1.0000

[wxWindows]

[wxWindows/wxHtmlHelpController]
hcNavigPanel=1
hcSashPos=182
hcX=165
hcY=129
hcW=1220
hcH=784
hcFixedFace=
hcNormalFace=
hcBaseFontSize=10
hcBookmarksCnt=0

[wxWindows/wxHtmlHelpController/wxHtmlWindow]
Borders=10
FontFaceFixed=
FontFaceNormal=MS Shell Dlg 2
FontsSize0=7
FontsSize1=8
FontsSize2=10
FontsSize3=12
FontsSize4=14
FontsSize5=17
FontsSize6=20

[CutCircle]
Xorign=0.0000
Yorign=0.0000
Dia=0.5000
Direction=0
InOut=0
Rapid=0.1000
Ztop=0.0000
Zdepth=-0.3750
Zstep=0.1500
StepOver=99.0000

[ArcSlot]
Xcen=0.0000
Ycen=0.0000
Radius=29.1340
SlotWidth=0.5000
StAngle=90.0000
ArcAngle=180.0000
Ztop=0.0000
Zdepth=-1.0000
Zstep=5.0000
Rapid=0.1000

[RectangularPocket]
Xorign=0.0000
Yorign=0.0000
Length=22.0000
Width=14.4000
Orign=2
Ztop=0.0000
Zdepth=-2.0000
Zstep=1.0000
Rapid=0.1000
StepOver=81.0000
CornerRadius=0.0000
RotAngle=0.0000

[HoleLine]
Xstart=0.0000
Ystart=6.0000
Num=4
Inc=1.0000
Angle=0.7854
Trav=0.1000
Depth=-0.5000
Peck=5.0000
RapidHt=0.2000
Type=2
HoleDia=1.0000

[Gear]
Xstart=1.0000
Xend=2.0000
Diameter=2.0000
NumTeeth=45
Setup=1
Rapid=0.1000
Depth=-0.1000
Cut=0.1000

[Spline]
Xstart=1.0000
Xend=2.0000
Diameter=2.0000
NumTeeth=6
Rapid=0.1000
Zdepth=-0.1000
Zstep=0.1000
X1=0.0000
X2=1.0000
SlotWidth=0.5000
Ztop=0.0000

[HoleList]
Trav=0.2000
Depth=-0.1000
Peck=0.1000
RapidHt=0.1000
Type=4
HoleDia=2.0000

[Link]
Xorign=0.0000
Yorign=0.0000
Length=6.0000
Width=1.0000
R1=1.0000
R2=1.5000
Direction=1
Ztop=0.0000
Zdepth=-1.0000
Zstep=0.3000
Rapid=0.1000

[Colors]
TPbackgroundTop=13526784
TPbackgroundBot=4525072
TPrapColor=255
TPlinColor=65408
TParcColor=65535
TPhighColor=16118725

[Rectangle]
Xorign=5.0000
Yorign=0.0000
Length=2.0000
Width=2.0000
Rapid=0.1000
Ztop=0.0000
Zdepth=-0.5000
Zstep=6.0000
Orign=3
InOut=2
Direction=0
CorR=0.0000
RotAngle=30.0000

[Thread]
Xcen=0.0000
Ycen=-10.0000
Diameter=2.0000
Pitch=20.0000
Zstep=0.0500
Rapid=0.1000
Ztop=0.0000
Zdepth=-1.0000
InOut=0
Hand=1
Mill=0

[HoleRectangle]
Xstart=0.0000
Ystart=0.0000
Length=6.0000
Width=3.0000
NumLength=5
NumWidth=4
Orign=2
Pattern=0
Trav=0.2000
Depth=-2.0000
Peck=0.5000
RapidHt=0.1000
Type=0
HoleDia=0.8750
Ztop=0.0000
RotAngle=30.0000

[Preferences]
LookAhead=20
[Machine]
MaxRPM=0.0000
MaxFeed=0.0000
MaxPlunge=0.0000

7

General Mach Discussion / installing millwizard

« on: June 22, 2017, 06:45:26 PM »

i have a new computer im trying to installi millwizard i comes up with
this applcation has failed because the applcation configation is incorrect any help would be good

8

General Mach Discussion / Re: PCID

« on: June 22, 2017, 04:55:34 AM »

its changed from last time i got new computer i cant find the PCID

9

General Mach Discussion / PCID

« on: June 22, 2017, 03:19:49 AM »

were do i find my PCID

10

General Mach Discussion / Re: Transfer from reseller ?

« on: June 22, 2017, 03:16:37 AM »

were do i find my PCID