Guest
Show Posts
1
Building or Buying a Wood routing table.. Beginnners guide.. / Re: MACH 3 "press reset mergency mode active"
« on: December 30, 2013, 12:49:41 PM »
problem solved, press the online button and go offline, and mach 3 resets and stays reset
next problem -
The machine is communicating with the control box but I don't think the control box is communicating with the computer(mach 3)
1. Its not detecting the limit switchs( when setting them up in mach 3.
2. Machine does not move manually, when pressing the left and right or the up and down.
3. Its not calabrating the axis(no movement at all)
4. whilst trying to set the spindle up in mach 3 its saying spindle pulley to fast at max
can any body please give me some advice, please please.
next problem -
The machine is communicating with the control box but I don't think the control box is communicating with the computer(mach 3)
1. Its not detecting the limit switchs( when setting them up in mach 3.
2. Machine does not move manually, when pressing the left and right or the up and down.
3. Its not calabrating the axis(no movement at all)
4. whilst trying to set the spindle up in mach 3 its saying spindle pulley to fast at max
can any body please give me some advice, please please.