1
General Mach Discussion / setting up Mach3 lathe
« on: May 19, 2007, 03:16:48 PM »
I am trying to set up a cnc lathe with Mach3 turn. I used bobcad to do a simple taper.
I set the taper at .015 per pass but the machine tries cut the taper depth in a single pass.
can anyone tell me what I am doing wrong
Thanks
DRDJR
I set the taper at .015 per pass but the machine tries cut the taper depth in a single pass.
can anyone tell me what I am doing wrong
Thanks
DRDJR