Guest
Show Posts
1
Mach3 under Vista / Re: THC 301 install file
« on: March 09, 2013, 05:39:54 AM »
Hello,
Download and unzip the THC 301 files. Copy the unziped files on the Mach 3 files.
Start again Mach 3 in loader mode and select THC 301.
I make like in the manual and works.
BUT I have another problem: the READY led doesn't work even I check the parallel port 2 and the THC 301d with the tester cards from the kit.
The THC 301d when is tested with cables connected it works according with operator manual at test page.
When is connected at the PC on parallel port 2 doesn't works and the READY led is off.
Download and unzip the THC 301 files. Copy the unziped files on the Mach 3 files.
Start again Mach 3 in loader mode and select THC 301.
I make like in the manual and works.
BUT I have another problem: the READY led doesn't work even I check the parallel port 2 and the THC 301d with the tester cards from the kit.
The THC 301d when is tested with cables connected it works according with operator manual at test page.
When is connected at the PC on parallel port 2 doesn't works and the READY led is off.