Hello Guest it is January 18, 2020, 06:47:20 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - vector459

Pages: 1
1
General Mach Discussion / Re: Circle accuracy problem
« on: February 05, 2014, 01:53:26 PM »
Thanks soo much for your guys help. I figured it out and it was a simple mistake by me :(   It was tool deflection.. In the Mach wizard I had 1mm depth of cut and in my cam I had 2mm. That's all it took. To make the cuts similar.

I feel like a dork but truly appreciate all your help :)

2
General Mach Discussion / Re: Circle accuracy problem
« on: February 05, 2014, 01:01:36 PM »
Sorry not familiar with the 2 files you are wanting? Are those the mach3 circle wizard gcode?

You already have my bobcad file and g-code correct?

Thanks again

3
General Mach Discussion / Circle accuracy problem
« on: February 05, 2014, 09:50:38 AM »
Hi Guys,

I am having a little problem. I'm hoping maybe it is some setting I am missing somewhere.

 Example:
I use Bobcad v25  and If I program and cut a 30mm circle pocket, it is always like .15mm smaller  than the 30mm.  but in the G-code all the numbers make sense and add up to a 30mm circle> But when I use the Mach3 circle pocket wizard, I get a perfect 30mm circle pocket?

I asked the guys over in the Bobcad forum, but it seems so far my G code is looking correct,  so I'm not sure what's going on? Maybe some arc setting or ??

Thanks in advance for any help


4
G-Code, CAD, and CAM discussions / Re: Solidcam Mach 3 post issues
« on: February 05, 2013, 05:21:53 PM »
Ended up just purchasing Bobcad V25 after I tested it out.  So disregard :) Thanks

5
Post Processors / Re: Solidcam 2006 Rev10 to mach2-mach3 post pro
« on: January 30, 2013, 07:26:41 PM »
A guy im going to school with is going to sell me his complete laptop with the software on it.  It is nice but for the price he wants if i cant find a PP that will work I will just  look at bobcad. For what I do I dont need anything crazy. It is nice though. His shop switched to Mastercam.

6
G-Code, CAD, and CAM discussions / Solidcam Mach 3 post issues
« on: January 30, 2013, 05:47:29 PM »
Hi, Im using Solid cam with Mach 3 and a Taig mill. I have tried all  3 Solidcam posts on the forum and hte fanuc and I keep getting this strange action?

always when starting the z goes down to like 210mm?

Here is a pic of Mach preview

7
Post Processors / Re: Solidcam 2006 Rev10 to mach2-mach3 post pro
« on: January 30, 2013, 05:40:56 PM »
 a pic of the mach 3 tool path preview?

If anyone can help me  I would really appreciate it, thansk in advance  :)

8
Post Processors / Re: Solidcam 2006 Rev10 to mach2-mach3 post pro
« on: January 30, 2013, 01:13:59 PM »
Hello using SC 2010 to Mach 3 on taig mill and keep getting the z going down to like 200mm? I tried all 3 Posts on this thread and the Fanuc as well. I checked the drawing and don't see any OD points etc..?

Pages: 1