Messages

1

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 18, 2015, 11:53:31 PM »

Never mind Gerry,
I got it all working. Is nice to be able to control the speed of the spindle within Mach.

Gus

2

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 18, 2015, 10:35:00 PM »

Hi Gerry,
I was wondering if you can help me?
I have a  Mach3 plugin for Huanyang VFD is just a dll file  that I put in the plugins folder under mach3
But I have no idea as how to install that within mach. If I click on the tab plugin control the only window I see
Is  (video window) and thats it. I have an USB to RS485 adapter that I will use to control my spindle.
Can you Help me?

Thank you
Gus

3

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 15, 2015, 11:05:02 PM »

These are the last five lines on my Gcode
N4280G00Z0.8000
N4290G00X0.0000Y0.0000
N4300M09
N4310M30
%
Can you point out where do I add the m883?
Sorry just new to CNC world. 

4

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 15, 2015, 10:16:27 PM »

Something must be wrong with my keyboard I keep misspealling words.

5

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 15, 2015, 10:14:14 PM »

Thank you Thank you.
Finaly everything works as it should.
One last question How do I add a code for my machine to go to home or park position after the fish cut.
By the way I appreciate all your Help and the fast replies!!!

6

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 15, 2015, 07:11:31 PM »

The only message I get is
Material offset is Now carculated in inches.

7

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 15, 2015, 06:42:12 PM »

Another issue.
Now when the axis moves to the fixed plate location on my table Z travels about one inch down never touches the plate
and zeros out. My fixed plate is about 3 inches away from the bit. When I first setup the initial tool zero worked as it should.
Any ideas as to why is doing that?
Thanks.

8

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 15, 2015, 11:29:18 AM »

In General config it was ignore tool changes. I will change that to stop spindle and wait for cycle start.
On the tool change tab is not checked to ignore m6.
I will try again later Today and let you know.
Thanks for the quick reply!!!

9

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 14, 2015, 11:21:33 PM »

Miss typo: (touched my fixed plate then moved to the fixed plate on the table)
touched my removable plate then moved to the fixed plate on the table

10

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: August 14, 2015, 11:19:14 PM »

Gerry,

Another small problem. I did the initial tool zero the bit touched my fixed plate then moved to the fixed plate on the table
And started cutting but never asked for the tool change. Continued cutting with same bit. I use Vectric Aspire 4.5
the toolpath was generated  with 2 different tools. I can not figure out what to do next.
Can you please help me? I will try attaching the G Code.