1
General Mach Discussion / Re: Debounce
« on: February 20, 2017, 02:16:18 PM »
I search the forum for my relative issue and also find another thread:
https://www.machsupport.com/forum/index.php/topic,15570.msg104561.html#msg104561
I think, if installing a small (1uF) capacitor between signal pin and ground can help low debounce to do a good job in homing or probing,
that would be a proper way to run your g-code with low debounce value, especially for some potential EMI problem.
https://www.machsupport.com/forum/index.php/topic,15570.msg104561.html#msg104561
I think, if installing a small (1uF) capacitor between signal pin and ground can help low debounce to do a good job in homing or probing,
that would be a proper way to run your g-code with low debounce value, especially for some potential EMI problem.