Hello Guest it is March 28, 2024, 08:50:56 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - aldepoalo

Pages: 1 2 3 4 »
1
G-Code, CAD, and CAM discussions / Re: BobCAD, Mach3, Plasma cutting
« on: February 17, 2015, 09:25:05 AM »
I didn't get a call or response so I guess you are up and running?   If there is anything I can help with please let me know.

2
G-Code, CAD, and CAM discussions / Re: BobCAD, Mach3, Plasma cutting
« on: February 13, 2015, 11:54:52 AM »
I can email you the post, and make any other changes you might need.    Just call me and I'll take care of you.


3
G-Code, CAD, and CAM discussions / Re: BobCAD, Mach3, Plasma cutting
« on: February 13, 2015, 11:53:51 AM »
Here is some sample code based on the feed back in this thread.

( PROGRAM NUMBER: 100)
( PROGRAM NAME: BOBCAD1.NC)
( POST:  PLASMA  )
( DATE: FRI. 02/13/2015 , TIME: 11:53AM)
( T1 , DIAMETER = .06)
(JOB 1  CONTOUR)

N01 G70 G17
N02 G00 G90 G54 X.22 Y1.5
N03 M03
N04 G04 P2.
N05 G01 Y1.25 F5.
N06 G03 X.47 Y1.5 I0. J.25
N07 G01 Y2.25
N08 G02 X.75 Y2.53 I.28 J0.
N09 G01 X2.25
N10 G02 X2.53 Y2.25 I0. J-.28
N11 G01 Y.75
N12 G02 X2.25 Y.47 I-.28 J0.
N13 G01 X.75
N14 G02 X.47 Y.75 I0. J.28
N15 G01 Y1.5
N16 G03 X.22 Y1.75 I-.25 J0.
N17 G01 Y1.5
N18 M05
N19 M30
%

4
G-Code, CAD, and CAM discussions / Re: BobCAD, Mach3, Plasma cutting
« on: February 13, 2015, 11:46:12 AM »
Seeing that you already have a copy of BobCAD CAM V24, there really is not need to purchase other software.  You'll find that making changes to the post is easy enough to do yourself, but if you would like me to help I can.

Yes I would turn subs off, and yes the post processor can be setup to fire any m code you want at the start of cutting and at the end of cutting.  If you want to use a dwell you can do that aswell.


5
I would want to look at the part file.  It looks like it could be an issue with the geometry.

6
Promote and discuss your product / Re: Learn the truth about BobCAD-CAM
« on: February 27, 2013, 11:28:49 AM »
It sounds like you have 2 issues going on.

1)  Install problems, did you install a full version or just register the demo copy.  The other issue might be your computer specs.

2)  Post processors,  you may not be running the correct post, or have your machine definition setup correct. 

The help system we use is on line, so you can access it from anywhere....

http://www.bobcad.com/components/webhelp/BobCADCAMV25/en/BobCADCAM_V25_Help_System.htm#Introduction_and_Setup/Introduction.htm

Please call me so I can email you a new install and talk about your options. 

Al

866-408-3226

7
Promote and discuss your product / Re: Learn the truth about BobCAD-CAM
« on: February 12, 2013, 03:11:39 PM »
Go to Preferences> Customize

From here you can drag icons off tool bars or pick commands to add to tool bars. 


8
Promote and discuss your product / Re: Learn the truth about BobCAD-CAM
« on: February 04, 2013, 04:13:57 PM »
I am glad that I could help.  If you want to watch other videos of mine check out my youtube page.   http://www.youtube.com/user/Depoalo

If there are any other questions please let me know. 

9
Promote and discuss your product / Happy BobCAD CAM Customers:
« on: February 04, 2013, 08:26:13 AM »
1. “We use BobCAD to design and machine guitar parts. It is especially useful for the more complex parts such as necks and bridges. We are a small shop, 2 people, and BobCAD gives us a 3rd hardworking employee – our trusty cnc machine. The training we received at the seminar in Dallas really gave us a jump start in the use of BobCAD.” -Chris Jenkins, Lame Horse Instruments, Mansfield, TX

2.“We make the best gas engines for giant same model aircraft with BobCAD, and we wouldn’t change it for anything! BobCAD allows us to create beautiful parts fast and efficiently, and their customer support is second to none. BobCAD for us has been the difference between having to contract CAM services and being able to create our parts by ourselves.” -Mateo Saraga, SE Model Products, Miami, FL

3. “I use BobCAD at my shop to make knee and hip implant tooling that doctors and surgeons use every day. From multiple part assemblies to single 3D parts, BobCAD gives me the affordable flexibility to get parts from design to cutting in no time. Whether I get a file from a customer or I draw it myself, the CAM interface makes it easy to get my tools applied, program into the machine control, and get going!” -Jim Blinkenberg, Cameron Park, CA

4. “We use BobCAD V25 on our Amada Laser. We design and nest using BobCAD to get the most out of our machine. We have also started using BobCAD on our Flow Waterjet and are having great results. BobCAD has been a great tool and the new features on V25 are working flawlessly. The best thing about BobCAD is the ability to import files from our other software and use the utilities drop down menu to connect the lines and arcs to make a complete part with ease.” -Doug Parks, N-FAB, Houston, TX

5. “I use BobCAD in my shop to create signs, letter cutouts, engravings, shelf parts, picture frame parts, decorations, really anything I or my customers can imagine. We have used V24 for a year now and we have barely tapped its capabilities. This software has made life so much easier. I have had a great time learning to use v24. I bought a 24” by 60” cnc router and the V24 software with no prior cnc or CAD/CAM experience and thanks to BobCAD, we were able to produce useable parts the first day we turned the machine on. I have never had any problems with the software other than what comes from my lack of experience. It does a lot of the work by itself. I was concerned at first with the price, but it really has paid for itself in time saved within the first year. And we are just a small business. BobCAD has definitely increased our sales and profitability. I plan to begin working with V24 to make an electric guitar. This used to seem impossible, but now it’s definitely do-able. Thanks to BobCAD V24. Soon I would like to upgrade to V25.” -Phillip Lucas, Philz Woodwerks, Phil Campbell, AL

6. “We are building a 74ft steel sailboat in our front yard and in our little home shop; we have a 5 x 9 CNC plasma/router table. We’ve used BobCAD for making multiple parts and tools, but the best project so far has been making a propeller blade pattern we used to cast our one propellers. We also cut multiple models of the hull, but now that the hull is taking shape, we are really enjoying making functional parts that are also decorative.  We recently designed and cut 54 – 1/4″ steel, mermaid deck braces.” -Doug Jackson, Tulsa, OK

7. “I use BobCAD-CAM to design small engine parts for the kart racing industry. Using BobCAD makes it very easy for me to generate the machine code right from the drawing without having to use a separate software program.  I find the CAD very easy to use now that I have become more familiar with it.  I have also used the BobART module it to generate drawings and code from scanned items saving a lot of time by not having to actually make the drawing.” -Tim Taylor, Track Trends, New Hudson, MI

8. “BobCAD is the most useful tool in my work shop. I’m developing a stringed musical instrument business that used to wreck my hands and limit my ability to play. With BobCAM and its ease to use, I can cut parts in 15% of the time it used to take me to hand make them. I’ve used Pro E but BobCAM is far easier to use. After only 3 weeks with the great tutorials I was able to cut my first Mandolin neck. I’m now onto my own design of upright electric basses, designing the backs, tops, necks and all the other blocks to build this bass. BobCAM will definitely send me into full time building in the next few months.” -Douglas Kemp, Douglas Strings, North Ridgenille, OH

9. “Although my main use for BobCAD is hobby related, I also use it in my business. I design engrave and V-Carve plastic signs for Photo voltaic installations to indicate the presence of solar power, identify  shutoff switches and maps of the installation to assist emergency responders such as firefighters to ensure all power is turned off. I have designed and machined parts for a middle school under water l robotics team, which helped them win their regional competition and place 11th in the world competition. My hobby related uses have been to design and fabricate aluminum router mounts for my home built CNC machine, machine parts for the addition of a fourth axis, fabricate wood parts for gifts such as a rotating ear ring, necklace stand and jewelry boxes, and to make several commemorative plaques out of Koa for my wife to give out at her family reunion.” -Chip Conklin, Chips Marine LLC, Kailua Kona, HI

10. “I design molds from start to finish for the integrated circuit industry. Our parts are very small so it’s an art in itself. I also make a vast type of I.C. test sockets. I like the mat. setups for the fact that I cut a vast type of materials, plastics, tool steels, etc. I’m getting really good with the BobArt PRO. It’s so cool and it shocks my friends as to how I can be so good at art. I don’t tell them how easy you all have made it. If I can, in the years to come, do nothing but art work and program from my home that is my goal with BobCAD-CAM software… So far so good. I have 4 seats of the software for myself. I am also teaching my son to program. That is a gift I can give him for his future. I can’t even tell you how much BobCAD has helped me in the shop. Thank you all, I love it.” -Steve Eckhoff, Precision Contacts, Fair Oaks, CA

11. “I use BobCAD to create one-off car and motorcycle parts on my Hurco BMC 4020. The ideas for the parts either come from existing pieces or from friends with ideas.  From simple parts to complex 3d shapes, BobCAD allows me to create this in less time and effort. What an awesome product for the money. Go BobCAD team!” -Henry Kenuam, St Louis, MO

12. “We use it [BobCAD-CAM software] to design/build parts for antique cars and tractors. We also use it to develop art works and designs for an NC plasma cutter. Main use is components for marine and automotive use manufactured on our Haas Mill. We also use it to design/manufacture model R/C car and airplane components. We have used it to design and produce a Company logo on a 3 ft x 3 ft office type sign.” -Tom Weber, Toms Marine, Ft McMurray, Alberta

10
Promote and discuss your product / Mirror Features
« on: February 04, 2013, 08:25:05 AM »
I am not sure why you are having an issue with the mirror or copy and past feature.  If you would like to call me I can do a quick demo on the software and sort things out for you.

Here is a link for our help files that talks about the mirror feature and how it works:   http://www.bobcad.com/components/webhelp/BobCADCAMV25/en/CAD/Utilities/Mirror_%28Utilities%29.htm


This link is for a video I made where I show how to use the feature step by step:  http://youtu.be/A4oZQfmfrF0

If you have more questions about using BobCAD you can always call me or reply in this thread.


Pages: 1 2 3 4 »