Messages

1

Show"N"Tell ( Your Machines) / Re: 1995 DYNA MYTE DM4800 VMC to Mach3 Conversion

« on: November 27, 2011, 07:48:07 PM »

Ive got a 1995 dm4500 w/ a m3 control  i m not sure if it can rigid tap.an or does anyone how to tap in this machine

2

Show"N"Tell ( Your Machines) / Re: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion

« on: November 01, 2011, 07:48:00 PM »

john

when it goes into a tool change it alarms out alarm 1 = t2 mo1 alarm 0007      alarm 2 = 0202 not sure what they mean any idear.

wayne

3

Show"N"Tell ( Your Machines) / Re: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion

« on: October 30, 2011, 07:34:22 PM »

well ive look over the machine for what u had suggested look at seems ok.I made a quick program and ran it, ok but when it goes to tool change the turret comes over head goes up about .100th then mo1 feed hold im not sure if there is a parameter that i can change to adjust to get this head to go higher.i also need to change mm. to inch any help on those to questions.

4

Show"N"Tell ( Your Machines) / Re: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion

« on: October 28, 2011, 09:43:59 PM »

yes i have no luck yet.I used to fanuc and yasnac controls (robo drills matsuura)this a little different than what im used to

5

Show"N"Tell ( Your Machines) / Re: 1997 DYNA MYTE DM4800 VMC to Mach3 Conversion

« on: October 28, 2011, 08:32:43 PM »

HELP     
i just purchused a dm4500 1995  im having trouble getting this machine to do anything in mdi memory.I can zero return it i think but thats it ive talk to the original owner it was running about 4 months ago replace the battery and restarted the process really need help im in ma.   NEED HELP


WAYNE

508 6413239