Messages

1

General Mach Discussion / Re: computer crash help

« on: June 22, 2017, 06:11:57 PM »

Thx that worked
Dave

2

General Mach Discussion / Re: computer crash help

« on: June 22, 2017, 12:05:57 AM »

Yes I have all the files on a thumb drive
David

3

General Mach Discussion / computer crash help

« on: June 21, 2017, 11:07:03 AM »

can someone point me to a thread or link to reload my machine profile and licence info ?
THX
Dave

4

General Mach Discussion / Re: radius to end of arc differs from start

« on: June 21, 2013, 11:16:16 PM »

FYI found a good that the CNC cook book has some more good info on this and other mystery's LOL
Thanks for every ones help problem solved  zip line trolley built
http://www.cnccookbook.com/CCCNCGCodeArcsG02G03.htm
Dave

5

General Mach Discussion / Re: radius to end of arc differs from start

« on: June 18, 2013, 09:02:58 PM »

Thanks Gerry
That makes things clear I can see having Mach and Cam Bam butting heads if one is absolute and one is Incremental I will have to go back through my threads on Cam Bam and see what the setting was. Will one cut differently that the other?
Thanks again for the explanation
Dave

6

General Mach Discussion / Re: radius to end of arc differs from start

« on: June 18, 2013, 08:16:56 PM »

Thanks Hood
so G90.1 is Incremental and G91.1 Absolute or vise virsa? and could you explain a bit about how this is interpreted by Mach I need a better understanding. I know in Can Bam there is a setting for this and I have never understood I down loaded the new version of Cam Bam and now there are a lot of choices.
Thanks Dave

7

General Mach Discussion / radius to end of arc differs from start

« on: June 18, 2013, 09:08:20 AM »

I need some help please, I posted this on Cam Bam and am having no luck it is a zip line trolley plate nothing complicated an out side cut on a 1/4 plate with some radius  Mach get 's about 1/2 way and stops and I get this message "radius to end of arc differs from start"
Thanks
Dave

8

General Mach Discussion / Re: off line function

« on: March 08, 2013, 01:32:38 PM »

Thanks Hood I will give that a try and let you know
I am thinking it will work as last weekend I was doing a drill mop for a wife project and the machine was not following the program at all
Dave

9

General Mach Discussion / Re: off line function

« on: March 08, 2013, 01:22:12 PM »

no worries hood that is what I was thinking but sorta scared I will loose my settings what file do I save to re install
 on set up
Dave

10

General Mach Discussion / Re: off line function

« on: March 01, 2013, 01:55:26 PM »

Hi Hood
Sorry for the delay blew my back out here is the version
R3.43.053
Dave