Messages

1

Mach3 under Vista / Re: axis rhythmic noise (like a knocking)

« on: May 30, 2015, 04:48:04 PM »

errata corridge:
I changed the monitor from 19" BENQ 1280x1024 to BENQ 19"wide 1680x1050

2

Mach3 under Vista / Re: axis rhythmic noise (like a knocking)

« on: May 30, 2015, 04:12:57 PM »

Thanks Tweakie for your suggestion.
I already use a graphics card with 1Gb memory,
but just yesterday I have found the solution...that's incredible for me to believe!!
The problem of knocking axis it appeared in last period. What I changed?? The monitor!
I changed the monitor from 19" BENQ 1280x1024 to BENQ 19"1440x900.
The different resolution was the problem.
Now I returned at the first 1280x1024 and all is OK ....like before.
If someone is able to explain me the reasons I will be very grateful.
Many thanks
Andrea

3

Mach3 under Vista / Re: axis rhythmic noise (like a knocking)

« on: May 24, 2015, 03:19:38 PM »

An upgrading
Testing after testing I've found the guilty:
in DIAGNOSTIC screen, if I swicth OFF the TOOLPATH ON/OFF button the noise in each mode PROGRAM RUN and MDI, completely disappears!
Obviously is not the way for solve the problem because you lose the toolpath display.
Awaiting some suggestion
best regards to all.

Andrea

4

Mach3 under Vista / axis rhythmic noise (like a knocking)

« on: May 24, 2015, 12:34:07 PM »

Hi to everybody,
My name is Andrea from Bologna - Italy. I'm using a CNC Syil X6 Linear Plus (2011) and Mach3 version R3.043.066
I write to you for try to solve a problem.
Recently I heard, during the rapid G0 (1500mm/1'), a rythmic noise like a knocking in each axis. It becames very hight if I'm in MDI display, medium intensity in PROGRAM RUN display and disapper if I open OFFSETS window.

I 've read on web about this problem and:
my frequency of pulse is right (24980khz)
Excellent the result of the driver test
WIN 7 on computer dedicated. No internet conection.

Any suggestions will be very appreciated
Many thanks

Andrea

5

G-Code, CAD, and CAM discussions / Re: How to use my CNC mill as a vertical lathe

« on: October 26, 2011, 06:57:34 AM »

  thank guys, I'am trying to study, at first, Mach3turn. In the wizard i have already found my example : the external sphere. Then I must understand which parameters to input in Motor Tuning...maybe the same of the Mach3mill profile? Only in case of success I will post my work here

Regards

6

G-Code, CAD, and CAM discussions / How to use my CNC mill as a vertical lathe

« on: October 24, 2011, 03:34:55 AM »

Hi everybody,
please someone can explain to me, step by step, for turning on my CNC mill (Syil X6 linear plus+mach3).
I saw the Tormach's movie about this and it appears all easy. Exist a tutorial?
Many thanks

7

Post Processors / Post processor from Siemens NX 7.5 to Mach3

« on: June 19, 2011, 03:00:15 PM »

  Hi friends, I have a question for you:
There is a post processor from NX 7.5 (SIEMENS) to Mach3? Or something else that works fine for both?
Many Thanks

Pat64
from Italy