Messages

1

PoKeys / Re: Pokeys55 Errors / Lags / Slow Reaction in Mach 3

« on: May 25, 2011, 09:26:32 AM »

Hello!

I got an tip from someone in this Forum that i should try Pokeys Plugin Software 10.4 and not 10.6, and voila after install it works normaly


so i ques its some Software problem with mach and these version here...maybe not always but here its a Problem^^

2

PoKeys / Re: Mach only see's inputs when pockey software is running.

« on: May 24, 2011, 02:31:16 PM »

yipiii it works    Thank you very very very much!


i used Mach Version 3.042.020 with ur Version of the Plugin, first try it works!   amazing was sitting here and was screaming like wtf GO now

3

PoKeys / Re: Pokeys55 Errors / Lags / Slow Reaction in Mach 3

« on: May 24, 2011, 12:29:27 PM »

yeah well, sounds like the same, but they didnt write much about fixing that, i cant find the Plugin version 10.4 for an Test to download, iam rly Dissapointed atm that this thing dont work proberly cause in the Pokeys55 Software the Inputs came rly fast but in Mach 3 its not rly useable cause it has sometimes 1 sek lag or 2 and the MPG doesnt work rly

4

PoKeys / Re: Mach only see's inputs when pockey software is running.

« on: May 24, 2011, 12:22:21 PM »

Hello!


I have the same problem like the Thread starter, Pokeys55 Signale comes only into Mach 3 when the Programming Software is running, and then its rly slow, only when the pokey windows is open with the digital  inputs it gets 100% faster but always not perfect,  how do u fix that problem now ?

i cant find Pokeys 10.4 version to download for an test

5

PoKeys / Pokeys55 Errors / Lags / Slow Reaction in Mach 3

« on: May 23, 2011, 07:17:31 AM »

Hello!

first off all i am from austria (Europe) so my english isnt the best


the second thing is:

I am using Mach 3 for CNC Control and a Pokeys55 but i have some big issues with it, 
when i connect some Leds, Buttons, or an MPG Encoder on it i can see the Signals in the I/O Windows in Pokeys Software normaly and fast without any lag etc.

My Problem starts with Mach3 now, if i dont start the Pokeys Config Software Mach 3 doesnt get Input Signals from the Pokeys?! 
only when i start it i get Signals...

my second Problem is then the Encoder for MPG 1, if the Pokeys Software windows is *behind* oder minimized and Mach 3 in the front i Dont get any Signal from the MPG A/B Channel, only when i put mach 3 and Pokey software together on desktop it seems i get signal but i get not only 1 *Step* in the calibrate Window i get 62, the funnyest thing is i can see in the I/O Window in Mach 3 that the Encoder Signal comes in but in the mpg Window it doesnt do anything only when the Pokeys software is in the front...

i use an 30 step encoder wich work on Parallelport without this problems,
My Mach 3 version is R3.042.020, with Plugin Add on 10.6.4 and last Pokeys Version

maybe someone can give me a tip?
i reading many posts here but nothin sounds like my problem


bye