Messages

1

Mach3 under Vista / torch head control

« on: March 13, 2011, 08:30:33 PM »

having problems with the THC (torch head controller) not sending a signal to the plasma tool, I do see the M code come up, but torch doesn`t come on when you start . even though it works manually. any suggestions? Lil Coupe.

2

Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!

« on: March 13, 2011, 08:05:56 PM »

Hi, I`m lil coupe and just got my EZ Router  4x4 APC going after having it for about 6 months, still having a problem with the torch not coming on after intering the G code and hitting start. the person that helped me says the M code which is sappose to control the torch isn`t getting  signal from the THC (torch head controller) to the plasma tool. any ideas? thought I`d check the cord first.

3

Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!

« on: December 01, 2010, 01:26:49 PM »

hi Lulu, I`m a newbe to all this with a ez router plasma table (apc), loaded with mach3 version R3.00, BobCAD-CAM, Cut 2D, along with others.  hopefully someone out there can help me with working the bugs out, trying to get a retirement small gig going, like working with metals.

4

Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!

« on: November 15, 2010, 11:38:52 PM »

Hi my name is Pete and I just bought a 2009 Easy Router 4x4 APC with Mach 3, looking for help getting it setup.  Any advice/tips would be MUCH appreciated!  Still trying to figure all this forum stuff out. 

5

Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!

« on: November 09, 2010, 10:54:18 PM »

I was noticing that as of this writing we have 2795 members and have only heard from a couple of hundred and an even smaller number of regular posters.
new member with a used EZ-ROUTER, 4x4 apc table looking for help getting it going. from Portland Or.
So if you are new around here please post and introduce your self.  You could give a little on your background, hobbies , how you ended up here, whatever!

This is a site to help with mach. There is a great talent pool here already but this is a community driven site and we would love to hear from the silent masses

So stand up and say hi!!

Thanks,

Chad

soon to be 56 yr. old, commercial electrictian, hot rod, harley enthusiast, with a new toy/early retirement tool to play with.

6

Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!

« on: November 09, 2010, 02:20:39 PM »

I was noticing that as of this writing we have 2795 members and have only heard from a couple of hundred and an even smaller number of regular posters.
new member with a used EZ-ROUTER, 4x4 apc table looking for help getting it going. from Portland Or.
So if you are new around here please post and introduce your self.  You could give a little on your background, hobbies , how you ended up here, whatever!

This is a site to help with mach. There is a great talent pool here already but this is a community driven site and we would love to hear from the silent masses

So stand up and say hi!!

Thanks,

Chad