1
Spanish / Re: COMO CONFIGURAR MACH3 CON ESTA INTERFACE
« on: October 12, 2013, 05:20:05 PM »
CNC Breakout Board adapter for PC Stepper Motor Driver
CNC interface board, you can make your computer into a powerful CNC controller!
5 axis Breakout board
Compatible: KCAM4 MACH EMC2
Built in DB25 male connector
It is with 4-wire limit switch to insure our safty movement
It is with relay port to contro the cnc spindle
Working voltage is 5VDC and support with MACH3,EMC2,KCAM4 software
Size:9x5.7cm
....................................................................
25-pin parallel port control is defined as follows:
DB25 control pin (PIN) The pin of the drive board Comment
1 STEPB B(Fifth axis)pulse signal
2 STEPX X(First axis) pulse signal
3 DIRX X(First axis) direction of the signal
4 STEPY Y(Secondaxis)pulse signal
5 DIRY Y(Second axis)direction of the signal
6 STEPZ Z(Third axis) pulse signal
7 DIRZ Z(Third axis) direction of the signal
8 STEPA A(Fourth axis) pulse signal
9 DIRA A(Fourth axis) direction of the signal
10 LIMIT-1 Limit input interface 1
11 LIMIT-2 Limit input interface 2
12 LIMIT-3 Limit input interface 3
13 LIMIT-4 Limit input interface 4
14 DIRB B(Fifth axis) direction of the signal
15 Vacant
16 RLY Relay control
17 EN All axis enable
18-25 GND GND
CNC interface board, you can make your computer into a powerful CNC controller!
5 axis Breakout board
Compatible: KCAM4 MACH EMC2
Built in DB25 male connector
It is with 4-wire limit switch to insure our safty movement
It is with relay port to contro the cnc spindle
Working voltage is 5VDC and support with MACH3,EMC2,KCAM4 software
Size:9x5.7cm
....................................................................
25-pin parallel port control is defined as follows:
DB25 control pin (PIN) The pin of the drive board Comment
1 STEPB B(Fifth axis)pulse signal
2 STEPX X(First axis) pulse signal
3 DIRX X(First axis) direction of the signal
4 STEPY Y(Secondaxis)pulse signal
5 DIRY Y(Second axis)direction of the signal
6 STEPZ Z(Third axis) pulse signal
7 DIRZ Z(Third axis) direction of the signal
8 STEPA A(Fourth axis) pulse signal
9 DIRA A(Fourth axis) direction of the signal
10 LIMIT-1 Limit input interface 1
11 LIMIT-2 Limit input interface 2
12 LIMIT-3 Limit input interface 3
13 LIMIT-4 Limit input interface 4
14 DIRB B(Fifth axis) direction of the signal
15 Vacant
16 RLY Relay control
17 EN All axis enable
18-25 GND GND