Messages

1

General Mach Discussion / Errors on CNC

« on: February 13, 2013, 12:39:39 PM »

Hi i have some problems on CNC:

1: when i cut something the mashine make like i plugged out form LPT??? and then cut it wrong.
2: somethimes it cut very strange (like on picture) on picture:

BLACK OK cut
BLUE how cut machine ??

can you help me ??

2

General Mach Discussion / Foam Hotwire cutter

« on: March 12, 2012, 01:34:43 PM »

Hi of all!!

i bought a Mach3 about 1 year ago. and i m very happy about it. now i make second CNC cutter.. to cut foam:

i will controle 4 axis and i want to know if i can control wire cutter with mach3:

so i will have

X as X1
Y as Y1
Z as X2
A as Y2

so if i want cut some think witch have some difrent profilles as:

circle1.dxf
sqare1.dxf

how can i cut this with mach3. is some screen sets (what is)


i need a help

p.s.: soory about my poor language

greetings from slovenia!!

3

Works in progress / Re: 3 Axis Simple Screen setup 1.0 (Also good for TouchScreens)

« on: December 27, 2011, 05:12:19 AM »

hi... this is the best screen set i ever have but...

i dont find a button for auto zero tool!!  how can use this function on this screeen set ??

4

G-Code, CAD, and CAM discussions / Witch Postprocesor

« on: September 26, 2011, 10:23:26 AM »

Hello i m very new at CNC maching and i have one "problem" with generate G-code

i gave a normal 3 axis CNC machine and i work with some Cad programs and ArtCAM program to generat G-cod for my machine:

so i wint to Z rough with 20mm  tool an then i want to finish wit 3mm tool... and when i want to generate G-code (G-code (mm) (*.tap)) i got warning that i dont have postprocessor that alow me to change tool... what can i do ??


p.s. sorry about my language.. it's not my mother language


tnx

5

General Mach Discussion / Re: problems with spindle run on my CNC

« on: June 13, 2011, 02:16:28 AM »

I make to do right... i dont have some power on 12V for some part of electronic... and now work


Thanx

6

General Mach Discussion / Re: problems with spindle run on my CNC

« on: June 11, 2011, 02:36:33 PM »

I hope it will work

tnx

7

General Mach Discussion / Re: problems with spindle run on my CNC

« on: June 11, 2011, 02:18:58 PM »

i have this seting like you show and i change settings like i saw on video on mach3

output#1 : cahcek | 1 | 1 | active and still dont work...

8

General Mach Discussion / Re: problems with spindle run on my CNC

« on: June 11, 2011, 02:04:23 PM »

i setup on:

Config>Ports and pins
Output signals:

on output#1 :Chacked | 1 | 14 | active


but doesent work nothing

or if i must work on something other setup ??

9

General Mach Discussion / Re: problems with spindle run on my CNC

« on: June 11, 2011, 01:20:25 PM »

I have controled speed witout electronics... i need just off/on.. so i need only when start maching to turn on spindel and when its done spindel off. no need to regulate speed

TNX

10

General Mach Discussion / problems with spindle run on my CNC

« on: June 11, 2011, 12:51:05 PM »

Greetings !!

I have poblems with Connections/Setup on mach 3 with spindle:

i have 4 ports on LPT conroler that i can on/off my electric things.

RELAY1= P1
RELAY2= P16
Pump= P17

Spindle =P14
Spindle speed =P14* i thing i need to regulte extra electronics...

so i need help to setup my MACH3 to on/off my spindle and where to connect

THANKS!!


p.s. : sorry about my english