Messages

1

G-Code, CAD, and CAM discussions / How do i pause spindle for auto tool change,set soft limits,& 360'rotate 4th axi

« on: December 06, 2010, 11:46:44 PM »

I reloaded my software from to default settings and now:

EZ-Router with Auto Tool Changer

1)my spindle will not power/rpm down before it puts the tool back in the nylon holder.
 where do i find and what do i adjust to pause the spindle so it wont burn up my holders ?

2)What are soft-limits and how do I re set them?

3) when i try to round off square stock, it rotates 0 to 360 travels in y then 360 back to 0, is there a command for a continuous 360 infinite rotation
thanks

2

General Mach Discussion / Post Process for EZ-Router with ATChanger for Rotary Axis

« on: December 23, 2009, 05:46:07 PM »

I just updated my V-Carve Pro to Ver 5.504 and Ez Router told me to look on here to see if anyone has created a Post Process for the 4th Axis, I have Bob-cad on the laptop and Mach 3 on the Machine Control PC. He said they can't write a post until they build a machine with a rotary to test it on.
I also have the Automatic Tool Changer Option (4 position)
any help would be greatly appreciated
Gregg

ps New here, hope this is in the correct category.