Messages

1

General Mach Discussion / Re: Mach3 and 3D-Printer Problem

« on: April 05, 2015, 08:43:16 AM »

I changed the card by a other card .. other brand.... i destroyed the old card with a big hammer...

2

General Mach Discussion / Re: Mach3 and 3D-Printer Problem

« on: February 12, 2015, 12:05:12 PM »

Hello,

I also bought the same card and i also had the same problem(s). When using Master/slave axis (X,B) it only homes on X .. unchecking the dialog box "home slave with master axis" does not work.
When i disable motor B in motor outputs... and do ref all... motor A and C start homing?... allready removed the card and orderd another one.

3

*****VIDEOS***** / Re: See more than 290 videos of members machines.

« on: January 13, 2011, 06:35:25 PM »

YOOHOOO!!!  Ralf here from holland!

Just finished my CnC mill.. whit a roller pinion system..made myself...

cnc runs greaatttt!! look at my video on youtube..and leave some reactions.

Here the link: http://www.youtube.com/watch?v=GNCns_Y_c_k

Thanks for watching

Greetings,
Ra

4

Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!

« on: January 13, 2011, 06:33:23 PM »

YOOHOOO!!!  Ralf here from holland!

Just finished my CnC mill.. whit a roller pinion system..made myself...

cnc runs greaatttt!! look at my video on youtube..and leave some reactions.

Here the link: http://www.youtube.com/watch?v=GNCns_Y_c_k

Thanks for watching

Greetings,
Ralf

5

NC Pod / Re: Ncpod is not recognized

« on: April 07, 2010, 12:17:33 PM »

i am sorry guys,  i mean pin 2 is emergency button and pin 3 is z zero/probe

i have the documentation included

greetz

Ralf

6

NC Pod / Re: Ncpod is not recognized

« on: April 04, 2010, 05:19:54 AM »

I believe pin 3 is for emergency
and pin 2 for the probe

the rest of the pins you can decide for yourself

If i am correct!!!

Greetz,

Ralf

7

NC Pod / Re: Ncpod is not recognized

« on: March 03, 2010, 01:43:05 AM »

yes i use the build in homes.. but it needs a input signal
in "plugin control" then you can choose which homing you choose

i use single stage

Ralf

8

NC Pod / Re: Ncpod is not recognized

« on: March 02, 2010, 04:23:15 PM »

port 1 and pin 1 i use for x
port 1 and pin 4 i use for y
port 1 and pin 5 i use for Z

port 1 and pin 2 i use for estop

9

NC Pod / Re: Ncpod is not recognized

« on: March 02, 2010, 04:20:54 PM »

The latest version of mach and ncpod are on the mach site "downloads"

I am waiting for some parts too finish my cnc..but i have the reference switches allready working on ncpod
make sure that active low is on in "input signal" at "ports and pins"

Port 1 and pin 1 i use (up to yourself to deside)

dont use pin 2 and 3 because its for the emercency button and the probe..the rest of the pins you can deside for yourself

I am also experimenting whit my ncpod ..so dont assume i am 100 % right but thats what i know so far..good luck 

10

NC Pod / Re: Ncpod is not recognized

« on: February 03, 2010, 02:23:02 PM »

Thanks for th info graham in the PM