Messages

1

Competitions / Re: ******Guess and win a G100 Grex******

« on: May 22, 2007, 09:45:07 PM »

2,000,000.5 chips, I saw a broken one in the corner. better check your tool for wear or damage.

Bk

2

General Mach Discussion / Re: Install of Mach3 Ver 2.033

« on: January 14, 2007, 10:15:20 PM »

To All,
 Thanks for the assistance and time to reply on this posts.
Problem was solved by going in CONTROLPANEL/REGIONAL SETTINGS and disabling every language option except for US English. After doing this Mach3 loaded perfectly the first try.

Thanks again,
Brian

3

General Mach Discussion / Re: Install of Mach3 Ver 2.033

« on: January 14, 2007, 08:46:46 PM »

Today I will try and hunt down my orginal Windows XP installation CD rom for my notebook. The Desktop PC's I tried on earlier are all runnning a version of Windows with 2 lanuguages English and Thai. But the notebook only has English. Seems to be the only thing different.

4

General Mach Discussion / Re: Install of Mach3 Ver 2.035

« on: January 13, 2007, 10:00:27 PM »

Recent attempts for installing Mach 3
Removed Antivirus program from PC
Was not able to reboot the PC normally after installation because the PC hangs during driver installation everytime and you must shut it down by holding the powerbutton.
No wire less networks installed.
PC is new out of the box with just standard programs, XP Professional, Office and such
Downloaded newer file Ver 2.035

BK

5

General Mach Discussion / Re: Install of Mach3 Ver 2.033

« on: January 13, 2007, 05:59:05 AM »

 I stand to be corrected. The installation on the kids PC was not with the MACH3 Driver files. Once I tried to install the Driver files during installation we have the same error showing up, PC crashes and lists errors with the MACH3 driver files.

We tried on another PC in the office as well and same results, 3 PC with the same problems during installation.

BK

6

General Mach Discussion / Re: Install of Mach3 Ver 2.033

« on: January 12, 2007, 10:45:44 PM »

I even removed the virus scanning program for a try, deleted Mach3 folders, unistalled driver in Device manager.
Might have to end up swapping PCs with the kids as I tried their PC and everything installed fine even with 749 versions of GTA, Battlefied, MSN and who knows what else they have installed in the past year!

7

General Mach Discussion / Re: Install of Mach3 Ver 2.033

« on: January 12, 2007, 10:11:36 PM »

I gave that a try and still had the same trouble. Then I restarted in safe mode, and the driver installation process completed. But when I restart in normal (not safe mode) mode the computer stops during bootup with error messages on a blue screen. Appears there is a conflict on my machine with the drive addressing and something else.

8

General Mach Discussion / Install of Mach3 Ver 2.033

« on: January 12, 2007, 08:24:21 AM »

I just purchased a new PC to use on the Plasma table we are building and ran into difficulties installing the Mach 3 program. When it gets to the point of installing the drivers for Mach3 the PC automatically reboots. I have the same file loaded on my notebook with no trouble. The PC we purchased is a Intel Celeron D2.66GHz. My notbook is older at 1.6GHz. Any ideas.