1
General Mach Discussion / thinking about mach conversion on my Shizuoka mill, need help
« on: April 19, 2009, 12:50:06 PM »
Hi guys, i'm Dan, and i'm new here.
I recently purchased a Shizuoka CNC mill with a bandit level 2 controller. I'd like to possibly ditch it for a mach 3 system. My question is how hard or possible would it be to get this to work with the tool changer, spindle speed adjuster, ect? I'd like it if the machine was fully functionable.
Thanks,
Dan
I recently purchased a Shizuoka CNC mill with a bandit level 2 controller. I'd like to possibly ditch it for a mach 3 system. My question is how hard or possible would it be to get this to work with the tool changer, spindle speed adjuster, ect? I'd like it if the machine was fully functionable.
Thanks,
Dan