Messages

1

General Mach Discussion / Re: Mach jogging got disabled, how do I get it going again?

« on: March 21, 2013, 03:04:56 PM »

I discovered my jogging didn't work on a wizard I made after I moved the jogging buttons to the persistant (0) screen using Machscreen.
It drove me nuts until I read this post and moved the jog buttons back to each screen. Now it works fine.
Rich

2

Screen designer tips and tutorials / Re: Code to move to machine coords

« on: December 20, 2012, 04:04:58 PM »

Thank's for the info.  After more research (RTFM) I found that the G53 code is non-modal and needs to be on the same line as the coordinates.

Rich

3

Screen designer tips and tutorials / Code to move to machine coords

« on: December 18, 2012, 09:53:57 PM »

I'm modifying a screenset with a button for "Load Material".  I've got user dro's 1017, 1018 and 1019 for the load material position.
The code for the button is Code "G00 X" & getuserdro 1017 etc.  This sends the head to the program coordinates.  How can I get it to send it to machine coordinates?  I tried putting a G53 ahead of the code but this didn't seem to help.

Rich

4

Newfangled Solutions Mach3 Wizards / Re: COPYCAT - "KOOL"

« on: April 16, 2009, 07:45:19 PM »

Ron,
I just bought a probe, will copycat support it or is it just for lasers and cameras?

Rich