Hello Guest it is November 30, 2020, 12:49:09 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - manmeran

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1
Hi Amir
I'm using the older 2100 series which is on Ethernet. I would recommend an econo series for a new purchase. The latest accellera is the best card if money is no object.
John.


i think for this time , Kflop is better . The same performance and lower price .
What do you think?

Amir

2
john
about galil :Which series did you use?

3
hi John
do you have any experience with Galil card+mach?
do we can to compare it with Meldas?

Amir

4
the crash result in axis is for example :breaking tool (in addition,Finally drivers can stop axis with fault signal)
but in toolchange this result is very big and maybe Horrible accident
Amir

5
fot toolchange if you can use PLC, i think is better and safer
mach run in windows and it not safe %100

Amir

6
this machine made in 1997 . do you test rail for wobble and ballscrew for backlash?
Amir

7
woow .very interesting
I always love your changes on the machine.
Amir

8
Show"N"Tell ( Your Machines) / Re: Bridgeport is getting an overhaul
« on: September 07, 2011, 05:23:26 PM »
The servos encoder have 2000 line (8000 counts per rev) and the gearing on the axis is 2.5:1 with 5mm pitch screws so resolution will be 0.00025mm and I am hoping to get the tuning so I have a following error of 20 counts/20mS so that would mean the axis would trip if it was ever 0.005mm out of position.
Hood

If you have been reached 5um accuracy then i must say congratulations and happy for you.
Amir

9
Show"N"Tell ( Your Machines) / Re: Bridgeport is getting an overhaul
« on: September 07, 2011, 04:18:34 PM »
yes
do you used c5 ballscrew in this machine?
and pls brand?
Amir

10
Show"N"Tell ( Your Machines) / Re: Bridgeport is getting an overhaul
« on: September 07, 2011, 04:06:41 PM »
hi Hood
Please talk about the accuracy in your machine.

Amir

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24