Hello Guest it is March 29, 2024, 09:29:24 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - baranbey

Pages: 1
1
Chaoticone ,
Problem was our router was keep taking shortcuts and making ''evil edges  ::)  '' we were trying everything  but finally we solved with all the help from you guys!
Actually we  tought we were chanceing the parameters from the machscreen but  it makes no effect at all (switching between g61/g64 -exact stop/constant velocity )
Somehow we manage to embed those codes trough the actual machine code and it works (i think the screen design has a problem maybe the buttons are not assigned ? or whatever )
 we solved thank you  again 
for the future reference , if any one faces something like that(please see the past posts) please also keep that in mind sometimes the buttons you think works actually may be disabled! so go old school and add  the damn code  in your lines !!! ;D 

thanx all!
Baran Ozcaylan

2
THANK YOU ALL FOR HELPING US OUT !!!
PROBLEM HAS SOLVED!
NEED ANYTHING LET US KNOW
ALL THE BEST FROM ISTANBUL
MEKANO TEKNIK /BARAN OZCAYLAN
www.mekano.com.tr 

3


THANX FERNANDO WILL TRY A.S.A.P
HAVE A GREAT WEEKEND TO EVERYONE
ALL THE BEST FROM ISTANBUL!
BARAN OZCAYLAN

4
Hi all ,
Here is the code, thank you for the efford guys.
f is 2500 and unfortunantely it has to stay that way !
we are running as ;
steps per/mm 200 / velocity 5000  / acc400   / 35.000hrz.
we did reduce the rounding with accell. on motor tunning, but still have the ''evil edges'' situation.
g61 and g64 has no changes in situation.(Actually it works better with
CV Dist Tolerance0.5 units 
stop on CV angle 91 Degrees)

Just trying !!!
will send more screen shots and codes.
Thank you very much.

5
will try A.S.A.P !
Mach3 2.0
 Also another trick we discover is not connect the lines in document so the tool path sees it as seperate commands and stops before cutting
  ;)
Thanx!

6
Hi All,
Thank you for that fast responce!!
we are working on the infos you guys gave, that helped a lot ,Especially post from Art(you're the man !) we lower the amount of rounding effect by adjusting accelleration.but still have the damn rounding . We are running simulation to see this effect and rounding is random don't know  why ???
We are g61 , still working on..
Okay lets try another approach to the problem
how can we make the machine stop (pauses/whatever?)between corners is there any g code that i can add to make the damn thing stop and starts instead of trying to take the corner and and up rounding it  ???
Thank's for the info again
Have you guy's check our web site we have nice machinery there!
 ;)
Baran

7
Hi All !!!,
As a mach3user (an experienced one !) we are facing a  problem for the first time !!
while cutting a 2-d contour on a line  ,when machine comes to a 90degrees corners (either to the left or rigth) it takes ''shortcuts'' from the corner!(see the attachment please!)
We have checked the ;
Tool path,
Document we try to cut,
Pc's configuration,
Memory optimization,
Upgradeing to the latest version,
 But not be able to solve the problem,While looking deeper to the options we came across with LOOK AHEAD option in general logic config.
as we lover the numbers in there ,problem is getting better but  we still have the problem!!!  and also the error appears randomly,and not follow any pattern.
For  example sometimes left turns are problem ,sometimes right turns
we are positive about the error is from the mach3
We are cutting with a 0,78 tool and making a very detailed 2-d cut but if we cannot solve this issue  don't know what to do ???
 
Please see the attachments and advise !!!!!
 
Thank you very much in advange for your kind responce  and all the best from istanbul.
Baran Özçaylan
 
Mekano Teknik San. ve Tic. Ltd. Sti.
YB 34 Parsel
Istanbul Deri Organize Yan Sanayi Bolgesi
Tuzla, 34953 Istanbul, Turkey
 
Phone. +90 216 591 0806
Fax. +90 216 591 0807
Web. www.mekano.com.tr

Pages: 1