Messages

1

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: May 03, 2018, 03:14:41 AM »

Oh, btw, is it normal for external PP card to be visible from the PC in W7 and not from Mach3? In windows system / hardware section- the pport was 2020 and not 378 or something like this! I mean was 4 digits and not 3. Was that the problem? Could this 4 digit be recognized from Mach3 in Pin and ports?

2

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: May 02, 2018, 06:27:02 AM »

Craig, this is my next order! i know these BOB's and their quality. The PC is seeing the PP as well, but Mach3 cannot communicate with BOB! I tried EVERYTHING whith no luck at all! XP was the solution!
Tweaky, yes i did and nothing happens at all! I think Ordering from here and after is to order good BOBs and not cheap!
Thank you guys for your help indeed!
Vasili

3

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: May 02, 2018, 04:34:00 AM »

Nothing happens at all! I had to install Win XP to make it run properly! I've seen many pc's running Win7 with no problem and i'm still wondering......why?

4

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: May 01, 2018, 05:00:41 PM »

Thank you Craig, i'll check it and i'll come back!

5

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: May 01, 2018, 11:15:24 AM »

Yes!

6

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: May 01, 2018, 08:20:34 AM »

Hmmm , still getting question mark on driver.......

7

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: May 01, 2018, 02:38:02 AM »

Hi Craig!
I do reboot as the manual sais with no luck from the beggining !
Gerry, please tell me which SP need to be installed to W7 to work properly?
Thank you guys for your help!
Vasili

8

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: April 30, 2018, 10:36:46 AM »

Hi
I did reboot at the end of the installation, but the question mark remains.....

9

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: April 30, 2018, 07:01:11 AM »

What do i need to install correctly?

10

General Mach Discussion / Re: Mach3 driver not install correctly on W7 32 bit.

« on: April 30, 2018, 03:52:09 AM »

Different PC, different BOB my friend!