Hello Guest it is April 18, 2021, 02:59:46 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - BBRREID

Pages: 1 2 »
1
General Mach Discussion / Re: servo drive connection
« on: December 07, 2007, 04:07:00 PM »
Wanye,
got the Skyko's and I cant tune them in maybe the fact that the encoders are on the end of the ballscrew and not the motor
every time I press the jog key in Mach3 the Skyko faults out

I am now thinking about the Viper drives verses the Geko. any thoughts on this
Brian

2
General Mach Discussion / Re: servo drive connection
« on: April 26, 2007, 05:01:05 AM »
Just an update
still waiting for skyko boards, took delivery of beaver cnc mill, power supply needs renewed on Yamazaki cnc lathe, coming today I hope
and slight problem with Beaver mill ( goes into Allstop sometimes half-way through program),encoder needed for Bridgeport interact1 heidenhain 145 a little behind with orders to busy to have a nervous breakdown so everything just fine
Brian

3
General Mach Discussion / Re: servo drive connection
« on: April 12, 2007, 11:19:58 AM »
Thanks Wayne,
In the process of ordering 2 boards. If they work I will order another 8 boards
Brian

4
General Mach Discussion / Re: servo drive connection
« on: April 10, 2007, 01:22:38 PM »
Thanks Wayne,
my son measured 95 volts dc going into the drive so we will have to work out a way to reduce to 80 volts
I emailed Gecko with the info from the motors and I had a look at the Skyko which seems like a good idea also
I will have a look at Rutex also.its gonna have to be make my mind up shortly.
thanks
Brian

5
General Mach Discussion / Re: servo drive connection
« on: April 10, 2007, 06:26:51 AM »
Wayne ,
I emailed Norwin and got a quick reply here it is:-

The drive requires an analogue (+/-10V) speed command. How are you going to
generate this from the parallel printer port?

Regards,
John Stanness
Norwin Electronics Ltd

"speed command" does this help ?
Brian

6
General Mach Discussion / Re: servo drive connection
« on: April 09, 2007, 01:34:42 PM »
Wayne,
the drives work fine its the control thats a gonner which is an ANC www.adolph-numerical.co.uk
 and the large spindle motor SSD drive.I emailed Norwin and awaiting reply.
Brian

7
General Mach Discussion / Re: servo drive connection
« on: April 09, 2007, 10:58:42 AM »
Wayne,
I will get some pics together and there is one updated machine on ebay uk just now
cheers
Brian

8
General Mach Discussion / Re: servo drive connection
« on: April 09, 2007, 10:36:47 AM »
Thanks Wayne,
I will order the Geco drives and let you know when they arrive,
Regards
Brian
brian.reid@fsmail.net

9
General Mach Discussion / Re: servo drive connection
« on: April 09, 2007, 09:23:02 AM »
Wayne, thankyou for the reply.  here is the info on the motors:-
SEM  perm. magnet dc servo motor
type  mt 30E4-52
cont. stall torque 1.1 NM  tenv
max rpm 2700  Volts 140
Pulse Amps 13
Tacho 9.5  volts/1000 rpm
body size = 4 " diam. x 7. 5/8" long
position is by glass scale on one of the machines ( I have 4 all needing repaired) and another 2 with encoders on the end of the leadscrews Heidenhain  ROD 426.000B-250  ID. No. 295 434 35.
I really need to get at least one of the machines up and running ASAP but I dont know what road to take
Best Regards
Brian Reid

10
General Mach Discussion / Re: servo drive connection
« on: April 09, 2007, 07:13:06 AM »
Thanks Brian

Pages: 1 2 »