Messages

1

Bargain Basement / Re: Give Away Chicago Area

« on: October 31, 2017, 08:05:57 PM »

I'll  try to post pics tomorrow
Coop

2

Bargain Basement / Re: Give Away Chicago Area

« on: October 31, 2017, 07:41:18 PM »

Yes, it is on wheels but quite heavy though, would need a trailer with probably a winch or come along.

3

Bargain Basement / Re: Give Away Chicago Area

« on: October 31, 2017, 07:26:42 PM »

I still have it minus the z-axis, I may have enough pieces around to cobble one together though. The spindle is still available. I'll  try to get some pics this weekend.
Coop

4

Bargain Basement / Give Away Chicago Area

« on: October 01, 2015, 05:50:01 PM »

I need room and I have a converted from a PC board drilling machine base to cnc mill that has X/Y hooked to DC Servo Gecko Drives running Yaskawa Motors. (Toroidal transformer with large Caps)Very large ball screws 30mm dia. plus. I hung a piece of cold rolled plate off of the gantry and have a Z axis,minus the motor the Z axis does have a holder for an 80mm dia spindle.I have the spindle for a hundred, but not the VFD for it any longer. It was running when I took it out of service. I toyed with sprucing it up,or stripping it , but thought if anyone from the area wanted it (McHenry County), they could have it. The table measures 39.39" X 27" and although it is on wheels, it is quite heavy,I'm guessing a little over a  thousand pounds, so it would take a heavy duty trailer to pick it up. I have some pics if you give me an e-mail to send to.
Dave Cooper

5

Brains Development / Using multiple input lobe

« on: January 17, 2014, 04:59:02 PM »

On two of my three computers here I cannot select more than one input at a time for the purpose of and/or multiple input lobe. I have tried various things, even reinstalling Mach, but only am able to select one input at a time. Any help would be appreciated, Dave

6

Feature Requests / Tangental control for G2/G3 Moves

« on: March 10, 2009, 10:51:05 PM »

Would like to see Tangental control work on arc moves without having to break the arcs up into lines on my Cad software.
Thanks,Dave