Messages

1

G-Code, CAD, and CAM discussions / Re: For development

« on: November 29, 2009, 07:12:09 PM »

Hi Graham

The problem is to simulate in Mach3.
Run the Mach3 and see trajectory.

2

G-Code, CAD, and CAM discussions / Re: For development

« on: November 29, 2009, 07:32:07 AM »

Hi all

My goal is path on top of other objects, in Mach3Mill.
Attached file TestBoard-10B_CV.nc already configured the block.
Any person can simulate the CutViewer Mill, and help me?

Thanks

3

G-Code, CAD, and CAM discussions / For development

« on: November 24, 2009, 12:58:42 PM »

It is in relation to the G52, the file TestBoard-10B.nc is a great example I have an object
want to design four pieces on the machine.
In Mach3Mill it shows four objects, very good but has a problem.
In the course of the cutter he does the four objects is only the first object.
In programming VS2003 has subroutine that made the copies of object, you
can make a subroutine to path on top of other objects.
See http://www.cambam.co.uk/forum/index.php?topic=841.0
Note I have VS2005, I do not want the source code for Mach3.
Regards

Armando

4

Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!

« on: October 10, 2008, 12:18:09 PM »

Hi to everyone.
I'm riding my mill four-axis, the electronics is complete.
I've done tests with Mach is wonderful. 
Already bought the three packages of ArtSoft and CamBam.
The my use is hobby. 

Thanks
Armando Marques