Guest
Show Posts
1
Promote and discuss your product / Resolver and MACH3
« on: April 26, 2008, 06:47:03 AM »
Most of old servo machines have resolvers for axis positioning 
.
New RES3 module is intendend to be interface between MACH3 and axis amplifier
.
It can accept pulse input from parallel port for direction and speed, provide supply for resolver and output analog signal 10VDC (positive and negative
) for axis amplifier.
Contain and PID regulator
.
All parameters could be adjusted via RS232 input or RS485 bus
.
Tested with Fadal VMC.
If there is any interest contact me on
info@dizalice.net
.New RES3 module is intendend to be interface between MACH3 and axis amplifier
.It can accept pulse input from parallel port for direction and speed, provide supply for resolver and output analog signal 10VDC (positive and negative
) for axis amplifier.Contain and PID regulator
.All parameters could be adjusted via RS232 input or RS485 bus
.Tested with Fadal VMC.
If there is any interest contact me on
info@dizalice.net