Hello Guest it is April 11, 2021, 02:49:47 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Bengt

Pages: 1
1
PoKeys / What plugin to use for old 55?
« on: December 19, 2011, 03:00:51 PM »
Hi guys,
So I am back again with my toys and need som advise.What is the latest plugin to go with my old 55's?
Please take look at my site where I have some pictures and how my 55 is setup. http://www.93x57r.se/tecno-cnc/Mpg.html
Been looking around and I cannot get a clear picture of what plugin to use
so if you guys would help an old fart to get back on track with his project I would be grateful.

Cheers
Bengt
 

2
Brains Development / Is this possible to do?
« on: April 03, 2011, 04:32:50 PM »


Hi guys,
Is this possible to do in Brains or is a PLC the way to go?

4 inputs
4 outputs

If In1 High Out1 = High
If In2 High Out2 = High
If I1n+In2 high Out1 FLASHING and Out2 is Low

Cheers
Bengt

3
PoKeys / How do I setup this in Mach?
« on: June 12, 2010, 09:42:30 AM »
Hi,
How do I setup following Pendant in Mach3?



The handcontroll includes following:

MPG pins 1 and 2
Matrix keyboard 3-7 for columns and 14-17 for rows
LED matrix 9-10-11 these are LED's built in on switches in Keymatrix
LCD 4x20 on pins 23-26 28-30
Analog in for S and F override on pins 43 and 44

What parts do I have to tick in PoKeys Cfg?
Where do I do the keymapping for the keymatrix and LED mapping for the LED matrix?

Cheers Bengt



4
General Mach Discussion / Turn Tooltable weird figures
« on: August 16, 2009, 02:06:18 PM »
Hi,
wherefrom does the wierd figures come from to REF TOOL as all fields are like follows:
016122257031419763000000000000000000000000000000000000000000000000000000000000000

Cheers,
Bengt

5
General Mach Discussion / Unitronics PLC
« on: August 02, 2009, 11:32:16 AM »
Hi,
Anybody using Vision PLC's from Unitronics with Mach3/Modbus ?

Cheers Bengt

6
Modbus / Unitronics PLC
« on: August 01, 2009, 01:17:42 PM »
Hi,
Anybody using Vision PLC's from Unitronics with Mach3/Modbus ?

Cheers Bengt

7
Show"N"Tell ( Your Machines) / Bengt's Emco PC Turn 50 retro
« on: July 10, 2006, 08:59:00 AM »
Hi,

Here is some pictures on my retro project.

http://goto.glocalnet.net/Bengt.CNC.pages5/pictures.htm

Cheers
Bengt

Pages: 1