Hello Guest it is March 28, 2024, 11:02:04 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Giuno85

Pages: 1
1
General Mach Discussion / UPDATE POTENTIOMETER VALUE WITH BRAIN
« on: February 02, 2024, 10:41:22 AM »
Hello everyone.
I implemented mach3 using 2 external potentiometers one for the feed and one for the spindle speed.
I used the mach3 serial modbus module by connecting external potentiometers and buttons with Arduino.
Using a guide I found on this forum posted by zafarsalam.

Post: https://www.machsupport.com/forum/index.php?topic=22982.0

it works really well, communication is good and it is a very useful thing during processing.

The problem is that the data sent by Brain as an attached image is not always updated by mach 3, and when you press the stop or reset button the data is restored to the 100% value of both the feed and spindle.

it seems the values ​​are written in FRO% AND SRO% (imm-13) only when I rotate the potentiometer.

Is there a way to have Mach3 continuously read the value?

2
Mach Screens / assign a button to a userled
« on: January 26, 2024, 07:54:22 AM »
Hello everyone
Does anyone know how I can assign a button to an assigned LED button? On screen design
For example GetUserLed(1500)

3
 I control the start cycle from an external button via Modbus and Brains.
I tried to command the button by setting execute button script at the lobe termination, but it doesn't work.
Can someone help me?

4
 I control the start cycle from an external button via Modbus and Brains.
I tried to command the button by setting execute button script at the lobe termination, but it doesn't work.
Can someone help me?

5
Hi Graham, the script you made works great I tried it.
I would like to ask you, since I control the start cycle from an external button via Modbus and Brains.
I tried to command the button by setting execute button script at the lobe termination, but it doesn't work.
can you help me?

6
Good evening everyone, during the execution of the work cycle, it may happen that you need to interrupt the cycle by giving the Stop cycle, and then restart from that stopping point.
However, if you start the cycle, processing starts again regardless of whether the spindle is turning or stopped. This can lead to breakage of the cutter or damage to the machine.
I ask if there is an option in Mach 3 that can ensure that the cycle cannot restart until the spindle is turned back on... Or if anyone knows, perhaps even through a script, how to manage this thing

7
General Mach Discussion / INITIALIZATION HOME
« on: July 07, 2023, 12:02:01 PM »

Good morning everyone,
Is it possible to make it mandatory before executing a program to home the axes with mach3? Reset axes in machine coordinates?

8
Italian / INIZIALIZZAZIONE OBLLIGATORIA HOME
« on: July 04, 2023, 09:12:16 AM »
Buongiorno a tutti,
è possibile rendere oblligatorio prima di eseguire un programma fare la home degli assi con mach3? Azzerare gli assi nelle coordinate macchina?

9
General Mach Discussion / Total large screen mach3
« on: October 06, 2022, 03:01:08 AM »
Good morning everyone,
I am using mach3 with 7 "touch screen, given the small size of the screen, I would like to optimize the graphical interface as much as possible.
I would like to ask if anyone has ever happened or if anyone knows if it is possible to view the interface in full screen, removing or hiding the upper part of the window by removing the close or minimize keys and the word MACH3 as per the attached image.
I am using it with WINDOWS10 operating system

Pages: 1