Topics

1

General Mach Discussion / Getting Started

« on: April 07, 2022, 07:32:40 PM »

Howdy, folks!

After some six months of twaddling around, I'm nearly ready to take the plunge and start modifying a few parts for fixturing.  Can one of you please help me understand how to manually control the machine to do some simple cutting in jog mode?  Specifically, I can't see how to turn on the spindle short of an M3 command, and I'm not even sure where to enter that.

Backgrounder: I'm currently running a TAIG/MicroProto 3000DSLS machine now, having previoiusly owned a MaxNC 15CL many years ago.  So while I'm not a complete noob to CNC, suffice to say I'm rusty as hell and the software here is quite different than what I used those many years ago.  The manual received with the machine is silent on this, so I figure for sure someone here can lend a hand.

Thanks in advance!

2

General Mach Discussion / Homing a TAIG3000DSLS

« on: September 26, 2021, 04:13:35 PM »

Howdy, folks!

New member, second post (first is in the 'welcome' section), looking for a quick answer.

I just bought and assembled a TAIG 3000DSLS w/ 4th axis, installed the .DLL and their profile, and their instructions say to hit the 'home all' button, but nothing happens.  I'm able to jog all the axes, but the homing just doesn't work.  My previous machine (a MaxNC 15CL) would travel to the limits, 'bounce' off the switch twice and zero.  Not working on my TAIG.  Can someone help?

Thanks in advance!