Guest
Show Posts
1
General Mach Discussion / Going to blow my brains out soon please help !!
« on: March 27, 2020, 10:13:37 AM »
hi everyone i am new here i don't normal join forums but i am at my whits end with soft limits i have tried every combination off setting i can find nothing is working so i am hoping you lovely people can shed some light on what i am doing wrong.
so here goes.
ref all home goes to bottom left and z goes to max up travel all homing switches are working perfect all dro's reset everything is good.
in homing and limits settings x and y are soft min 0 soft max 1000mm
z axis is -142mm min and 0 max auto zero is on for all axis
z is reversed
i have also tried swapping values between - and +
i have turned off a axis is angular and rotational soft limits as suggested in another post online still no help
all i get is machine out of limits for soft limit activation
any help would be greatly appreciated thanks
so here goes.
ref all home goes to bottom left and z goes to max up travel all homing switches are working perfect all dro's reset everything is good.
in homing and limits settings x and y are soft min 0 soft max 1000mm
z axis is -142mm min and 0 max auto zero is on for all axis
z is reversed
i have also tried swapping values between - and +
i have turned off a axis is angular and rotational soft limits as suggested in another post online still no help
all i get is machine out of limits for soft limit activation
any help would be greatly appreciated thanks