Guest
Show Posts
1
General Mach Discussion / Homing Slaved Axis?
« on: June 10, 2019, 04:21:39 AM »
Hi guys,
I'm having a problem homing my slaved Y and A axis. Both axis are homing in the negative direction and they move together to the home position. The problem is the A axis sensor activates and the A axis backs off but, the Y axis continues moving in a negative direction once the Y sensor activates and at this point, I have to stop the machine to stop it racking further. If I check the slave homing box in the general logic config it homes properly using the Y sensor but obviously won't square the gantry.
Any help would be greatly appreciated!
I'm having a problem homing my slaved Y and A axis. Both axis are homing in the negative direction and they move together to the home position. The problem is the A axis sensor activates and the A axis backs off but, the Y axis continues moving in a negative direction once the Y sensor activates and at this point, I have to stop the machine to stop it racking further. If I check the slave homing box in the general logic config it homes properly using the Y sensor but obviously won't square the gantry.
Any help would be greatly appreciated!